Efficient Networks 5100 Configure RFC-2684 Bridged Protocol

SpeedStream Router User Guide
- Bridged Mode:
Passes PPPoE traffic through to the LAN; user runs Ethernet or another PPPoE client on the
computer to maintain the PPP connection.
- 2684 Bridge Mode:
Concurrently runs PPPoE with a 2684 Bridge on the same virtual connection.
- 2684 Bridge/IP Mode:
Concurrently runs PPPoE with 2684 Bridge/IP on the same virtual connection.
• PPPoA:
PPPoA is a PPP connection over ATM cells with encapsulation using either LLC or VCMUX;
routes traffic.
2. To continue to next window, click Next. Refer to the table below for the page number pertaining to
instructions for each protocol type:
If you selected: Go to:
RFC-2684 Bridged pg. 33
RFC-2684 Bridged/IP pg. 34
RFC-2684 Routed pg. 36
PPPoE pg. 38
PPPoA pg. 57
Configure RFC-2684 Bridged Protocol
RFC-2684 Bridged is a pure bridged
connection wherein the router accepts RFC-
2684 encapsulated traffic from the WAN and
drops the encapsulation to bridge Ethernet
traffic through to the LAN. No router
functions are performed on this traffic.
1. From the Protocol Selection window,
click RFC-2684 Bridged.
2. To continue to the 2684 Bridged window,
click Next.
Specify Connection Name
1. On the Connection Name window, enter
a name for the new connection.
2. To finish configuring the RFC-2684
Bridged protocol, click Next.
The VC Wizard window displays the
new connection information.
33