Horn/Light Alert
An external alert such as the vehicle’s horn or lights can be used to signal a call. The HORN option switch or
“HORN/LIGHT” Menu mode parameter can be used to turn this alert on or off. The on condition of the option switch is
indicated by a triangle in the display under the switch. Refer to the “Horn/Light Alert” description on page 14 for more
information.
LTR System Search
The “LTR SEARCH” menu parameter enables or disables the LTR system search feature (described on page 16). If
it is enabled, the transceiver automatically searches for a free system whenever a busy condition occurs when making an
LTR telephone call.
Menu Select
The MENU option switch selects the Menu mode described on page 18.
Monitor Mode Select
The MON option switch can be used to select the monitor mode as described on page 11.
Priority
If priority group sampling has been programmed on conventional systems by your system operator, the PRI option
switch or the “PRIORITY” Menu mode parameter can be used to enable or disable that feature. Refer to “Priority
Group Sampling” on page 17 for more information.
Radio Sounds
The “RADIO SNDS” menu parameter selects the tones that are heard when switches are pressed or busy or out-of-
range conditions exist. If this menu parameter is not available, the tones which sound are fixed by system operator
programming. The four available conditions are listed below.
Silent - No tones at all sound.Key Beeps - Only the Option and Select switch beeps sound. Alert Tones Only - The proceed, busy, and intercept tones sound, but not the key beeps.All - All tones sound.
Scan On/Off
The SCAN option switch can be used to turn the system scan feature described on page 8 on and off. The on condi-
tion is indicated by a triangle in the display under the switch. If you do not have this switch, scanning is not available.
Scan List Save
The “SCAN SAVE” menu parameter selects whether or not your changes to the scan list are saved when power is
turned off. If “ON” is selected they are saved, and if “OF” is programmed they are not saved. Refer to “Scan List
Programming” on page 8 for more information.