Ei Electronics Ei100S manual Model Ei 100S Ionisation, Product Description, Operation

Models: Ei100S

1 2
Download 2 pages 2.71 Kb
Page 1
Image 1
9V BATTERY POWERED

9V BATTERY POWERED

Model Ei 100S Ionisation

High sensitivity – responds to all standard fires Dual Ionization chamber - quick response to fast flaming fires

Battery powered – 9V (supplied) Needs no wiring

Missing battery indicator Low battery warning Built in sounder

Test and hush button Kitemarked to BS EN 14604:2005 5 year guarantee

Product Description

The Ei100S is an Ionisation Smoke Alarm that runs on a 9V battery (supplied with the alarm).

Ionisation smoke alarms operate on the principle that electrical current flowing between electrodes in an ionization chamber is reduced when smoke particles enter.

Ionisation technology gives a rapid response to fast flaming fires,

The Ei100S is easily installed and comes supplied with all necessary screw fixings.

The Ei100S is fitted with a warning flag that pops up when the battery is removed. This prevents the cover from closing when there is no battery fitted to the unit.

When the battery is being installed or changed, this flag must be held down while gently pushing the battery into the battery holder.

When the battery is first connected, the alarm may sound for 2-3 seconds – this is normal and means that the battery is connected correctly

Operation

The smoke detector will activate the built in sounder upon sensing smoke particles

Hush button to silence the unit for 10 minutes in case of nuisance alarm

The smoke detector will automatically reset itself and silence the sounder when smoke particles are no longer present in the sensing chamber

The built in sounder will provide a minimum sound output of 85dB at 3m

The smoke detector has a built in warning flag to prevent installation of the detector without a battery fitted

The “Test” button will perform a self test and sound the horn (it may take up to 10 seconds)

The smoke detector will emit a beep every 40 seconds to indicate that the battery back up is depleted and needs replacing

Shannon Free Zone, Shannon, Co. Clare, Ireland. Ph.+353 61 471277 Fx.+353 61 471053 Email. eielectronics@eiltd.ie

Web: www.eielectronics.com

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice.

Ei100S DataSht RevB

Page 1
Image 1
Ei Electronics Ei100S manual Model Ei 100S Ionisation, Product Description, Operation, 9V BATTERY POWERED