Model Ei144 Heat
Technical Specification
Sensor | Thermistor | Temperature Range: 0° to 40°C | |
|
| ||
Sensitivity: | Complies with BS 5446 Part 2: | Humidity Range: | 15% to 95% Relative Humidity |
|
| ||
| 2003 | Interconnect: | Up to 12 interconnected mains |
|
| ||
Source: | Contains no radioactive material |
| powered |
| alarms, along with an EI128 relay | ||
|
|
| |
Airspeed: | Essentially immune to the effect |
| base |
|
| ||
| of airspeed. | Fixing: | |
|
| ||
Button Test: | Simulates the effect of heat and | Plastic material: | UL94VO flame retardant |
| checks electronics and horn. | ||
|
|
| |
Supply Voltage: | 230V AC | Dimensions: | 145mm diameter x 52mm depth |
|
| ||
Battery back up: | 9V Alkaline Battery | Weight: | 281g |
|
| ||
Warranty: | 5 year (limited) warranty | ||
|
| ||
Alarm: | Electronic Piezoelectric horn | Approvals: | Kitemarked to |
| Approved | ||
| in unit |
| |
|
|
| |
Alarm Sound Output: 85dB (minimum) at 3m | Specifications are subject to change | ||
|
| ||
Alarm Status: | Red LED flashes every second on |
|
|
| unit sensing heat |
|
|
|
|
| Important Precaution: |
|
|
| Do not install the actual smoke/heat |
Installation & Placement |
| alarm itself in new or renovated | |
| buildings until all work is completed | ||
|
|
| (including floor coverings) and the |
Wiring for Interconnected Alarms |
| building has been fully cleaned. | |
| The wiring can be installed when | ||
|
|
| |
|
|
| appropriate. (Excessive dust and |
|
|
| debris from building work can |
|
|
| contaminate the smoke chamber |
|
|
| and cause problems, and it will also |
|
|
| invalidate the guarantee). If it must |
|
|
| be installed, cover it completely, |
|
|
| particularly around the edges, with |
|
|
| a dust cover (eg. a plastic bag), |
|
|
| until all cleaning is finished.. |
|
|
| Connect wires to the unit as in |
|
|
| wiring diagram. All wiring must |
Be very careful about correctly wiring the alarms as mixing Live and Neutral | comply with local codes. | ||
will blow/damage interconnected alarms. |
|
| |
Locate heat alarms in rooms adjoining or on escape routes – kitchens, garages, boiler houses etc. where smoke alarms are unsuitable. Install within 5.3m of potential sources of fire.
Please consult instruction booklet for specific installation details
Shannon Free Zone, Shannon, Co. Clare, Ireland.
Ph.+353 61 471277 Fx.+353 61 471053
Email. eielectronics@eiltd.ie
Web: www.eielectronics.com
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. | Ei144 DataSht RevA |
