MAINS POWERED 230V~
For the deaf and hard of hearing
Model Ei 169
Complete smoke alarm system
Includes high intensity strobe, smoke alarm and vibration pad
Rechargeable battery back up Test button
Continuous monitoring of wiring Interconnectable to other Ei alarms Auxiliary sockets
Low power cell warning
Complies with BS415:1990 electrical safety 5 year guarantee
Product Description | Operation |
The Ei169 is a complete smoke alarm system designed for the deaf and hard of hearing and can be selected with either optical or ionisation smoke alarms. For an ionisation smoke alarm, the system includes the Ei173 control panel, Ei174 vibrating pad and Ei151TL ionisation smoke alarm (with Ei172 pattress) and has the part number Ei170. For an optical smoke alarm version the Ei151TL is replaced with an Ei156TL optical smoke alarm, and the part number is Ei171
The Ei173 control panel includes a high intensity Xenon strobe, a sealed
The Ei173 control panel also incorporates a Test button and circuitry to continuously monitor the system wiring
The Ei174 vibrating pad is designed to be placed under the mattress or pillow to wake people who fail to respond to the strobe alarm
Up to 11 other smoke/heat alarms can be interconnected to the master smoke alarm. In the event of mains failure the rechargeable battery in the panel will power the system for one week.
The green indicator will illuminate to show mains power is present
The red indicator will flash once every second to show that the mains supply is off and the system is running on battery backup power
The red indicator will go off as the battery becomes depleted (with mains off)
The slide switch on the control panel disconnects mains and battery power from the control panel and extinguishes both LED indicators
The “Test” button will check the strobe, vibration pad and panel
When the smoke alarm is activated, the Ei173 control panel will flash the strobe at 1Hz and activate the vibrating pad
The interconnect wiring from the smoke alarm to the control panel is monitored so that if the smoke alarm is not connected or if it is open/short circuit, then the strobe will flash and the vibrating pad will turn on
An auxiliary socket allows the connection of an extra strobe or vibrating pad
Shannon Free Zone, Shannon, Co. Clare, Ireland.
Ph.+353 61 471277 Fx.+353 61 471053
Email. eielectronics@eiltd.ie
Web: www.eielectronics.com
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. | Ei169 DataSht RevA |
