Manufacturer Command

The purpose of the parameter manufacturer command is to specify the kind of operation requested in a MANUFACTURER_REQ.

The following manufacturer commands are defined:

1:Assign PLCI

2:Advanced Codec control

3:DSP control

4:Signaling control

5:RXT control

6:IDI control

7:Configuration control

8:Remove Codec

9:Options request

This information element appears in:

Manufacturer Specific

Manufacturer Command Parameters

The purpose of the parameter manufacturer command parameters is to specify command dependent parameters.

Parameters for manufacturer command 9: Options Request:

dword

Options mask

Manufacturer specific options that have to be enabled:

 

 

[Bit 0..5]: reserved, must be set to 0

 

 

[Bit 6]: Enable FAX paper formats and resolutions

 

 

[Bit 7..31]: reserved, must be set to 0

This information element appears in:

Manufacturer Command

7