CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.
EXTERNAL SPEAKER JACK | AUDIO INPUT JACKS | VIDEO INPUT JACKS | |
Connect an external | Connect the audio output | Connect the composite video | |
speaker system to this jack. | from video equipment to | output from video equipment | |
(Refer to P12, 13) | these jacks. | to VIDEO/Y jack or connect | |
| (Refer to P13.) | the component video outputs | |
| ● When the audio output | to VIDEO/Y, Pb/Cb and | |
| is monaural, connect it | Pr/Cr jacks. (Refer to P13.) | |
| to L (MONO) jack. |
| |
R – AUDIO IN – L (MONO) | VIDEO |
| |
Y – Pb / Cb – | Pr / Cr | ||
EXT.SP(8Ω) | AUDIO IN | S – VIDEO | USB |
(STEREO) | COMPUTER |
| RESET |
|
|
| |
MONITOR OUT | COMPUTER IN CONTROL PORT |
S-VIDEO INPUT JACK
Connect the
USB CONNECTOR (Series B)
When controlling the computer with Remote Control Unit of this projector, connect USB port of your personal computer to this connector. (Refer to P12.)
RESET BUTTON
This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart the unit. Do not use RESET function excessively.
MONITOR OUTPUT
TERMINAL
Connect a monitor to this terminal. This terminal outputs a computer input signal. (Refer to P12.)
COMPUTER AUDIO |
| COMPUTER INPUT |
INPUT JACK |
| TERMINAL |
Connect the audio output |
| Connect a computer output |
(stereo) from computer to |
| to this terminal. |
this jack. (Refer to P12.) |
| (Refer to P12.) |
CONTROL PORT CONNECTOR
When controlling the computer with Remote Control Unit of this projector, connect the mouse port of your personal computer to this connector. (Refer to P12.)
11
