28
Computer Input
Select the resolution at the Display area dialog box.
Display area
Adjusts the horizontal area displayed by this projector. Press the
Point Left/Right button to decrease/increase value and then press the
SELECT button.
Display area H
Adjusts the vertical area displayed by this projector. Press the Point
Left/Right button to decrease/increase value and then press the
SELECT button.
Display area V
When this function is on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Full screen
Reset
Store
Closes the PC Adjust Menu.
Quit
To store adjustment data, move the red frame pointer to the Store
icon and then press the SELECT button. Move the red arrow pointer
to any of Mode 1 to 5 in which you want to store and then press the
SELECT button.
Resets all adjustment to their previous levels.
Mode free
Vacant Mode shows values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and “Display
area V.”
closes this dialog box.
To store adjustment data
To clear adjustment data
To clear adjustment data previously set, move the red frame pointer
to the Mode free icon and then press the SELECT button. Move the
red arrow pointer to the Mode that you want to clear and then press
the SELECT button.
Display area
Press the SELECT button at
the Display area icon and the
Display area dialog box
appears.
This Mode has parameters being stored.
NOTE
Auto PC Adjust, Display area, Display area (H/V), and Full screen cannot be
selected when “480i”, “575i”, “480p”, “575p”, “720p”, “1035i”, or
“1080i” is selected in the PC System Menu (p25).