LC-X999-984

3

IMPORTANT SAFETY INSTRUCTIONS
All the safety and operating instructions should b e read
before the product is operated.
Read all of the instructions given here and reta in them for
later use. Unplug this projector from AC power supp ly
before cleaning. Do not use liquid or aerosol cleaners. Use
a damp cloth for cleaning.
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing serious injury to a
child or adult, and serious damage to the projector. Use
only with a cart or stand recommended by the
manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturer’s instructions, and
should use a mounting kit approved by the manufacturer.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, et c...
Slots and openings in the back and bottom of the cabin et
are provided for ventilation, to insure reliable operat ion of
the equipment and to protect it from overheating.
The openings should never be covered with cloth or other
material, and the bottom opening should not be blocked b y
placing the projector on a bed, sofa, rug, or other s imilar
surface. This projector should never be placed near o r over
a radiator or heat register.
This projector should not be placed in a built-in installation
such as a bookcase unless proper ventilation is pro vided.
This projector should be operated only from the type of
power source indicated on the marking label. If you are not
sure of the type of power supplied, consult your authorized
dealer or local power company.
Do not overload wall outlets and extension cords as this
can result in fire or electric shock. Do not allow anything to
rest on the power cord. Do not locate this projector wher e
the cord may be damaged by persons walking on it.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electr ic s hoc k .
Never spill liquid of any kind on the projector.
Do not attempt to service this projector yourself as op ening
or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qu alified service
personnel.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the followin g conditions:
a. W hen the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following
the operating instructions. Adjust only those contr ols
that are covered by the operating instructions as
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the projector to normal
operation.
e. If the projector has been dropped or t he cabinet has
been damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs t o this projec tor,
ask the service technician to perform routine safety chec ks
to determine that the projector is in safe operating
condition. This projector is equipped with a
grounding type AC line plug. Should
you be unable to insert the plug into
the outlet, contact your electrician.
Do not defeat the safety purpose of
this grounding type plug.
Follow all warnings and instructions marked on the
projectors.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage due to lightning and powerline surges .

An appliance and cart

combination should be moved

with care. Quick stops, excessive
force, and uneven surfaces may
cause the appliance

and cart

combination to overturn.

If the projector is to be built

into a compartment or similarily

enclosed, the minimum distances must be

maintained. Do not cover the ventilation slot on the
projector. Heat

build-up can reduce the service life of

your projector and can also be dangerous

.