LC-X999/984

45

PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, whi ch enables you to display the image in desirable si ze.
1. Press MENU BUTTON and MAIN MENU DISPLAY dialog box will appear .
2. Press POINT LEFT/RIGHT BUTTON(s) to select SCREEN and press the SEL ECT BUTTON. Another dialog box
SCREEN ADJUST DISPLAY will appear.
3. Press POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to the function that you want to adjust.
True
1. To turn the image size to true size (1280 x 1024 in SXGA, 1024 x 7 68 in XGA, 800 x 600 in
SVGA and 640 x 480 in VGA), move the arrow to T rue by pressing POINT UP/DOWN
BUTTON(s) and then press SELECT BUTTON. The image size is turned to the true size. The
“True” is displayed to indicate True mode (exc ept for XGA input).
2. When the input image data resolution is more than the screen si ze (1024 x 768), the image
can be panned by pressing the POINT UP/DOWN/LEFT/RIG HT (POINTING PAD) BUTTON(s).
Digital zoom
1. To adjust the image size or pan the image, move the arrow to Digital zoom by pressing POINT
UP/DOWN BUTTON(s) and then press SELECT BUTTON. MAIN MENU D ISPLAY and
SCREEN ADJUST DISPLAY will disappeared and “D. Zoom” and the magnifying-glass icon is
displayed.
2. Move the m agnifying-glass icon by pressing the POINT UP/DOWN/LEF T/RIGHT (POINTING PAD) BUTTON(s).
3. To ex pand the image, press the D.ZOOM (A) button or the SELECT butt on on the remote control unit. The image is
magnified by degrees (Expand function).
4. To c ompress the image size, press the D.ZOOM (V) button or the FR ONT CLICK button on the remote control unit. The
size of image is reduced by degrees (Compress func tion).
5. To pan the image, press POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) BUT TON(s) and move the magnifying-glass
icon.
NOTE:
1. To cancel the True and Digital Zoom mode, press other buttons (Except NORMAL BUTTON).
2. Press the NORMAL BUTTON in True and Digital Zoom mode, the image size changed to the screen size (1024
x 768).
3. The “True” and “Digital zoom” cannot be operated when “RGB”, “HDTV1O35i” or “HDTV1O8Oi” is selected on
the COMPUTER SYSTEM SELECT menu. (See pages 36 37).
•This projector cannot display in the resolution more than 1280 x 1024. If your computer’s screen resolution is
higher than 1280 x 1024, reset the resolution to the lower.
•The image data of VGA (640 x 480), SVGA (800 x 600), or SXGA (1280 x 1024) is modified to fit the screen
size in the initial mode.
•The maximum size in expand mode is 7 times as large as the original screen size.
•The minimum size in compress mode is the screen size (1024 x 768) in XGA or SXGA mode, 800 x 600 in
SVGA mode or 640 x 480 in VGA mode.
•Panning function can work only when the image is expanded.
•The normal “Panning Operation�� may not function properly if the computer system prepared with the “PC
Adjust” is used.

Keystone

1. W hen the image is distorted vertically, move the arrow to Keystone by pressing POINT UP/DOWN BUTTON(s) and then
press SELECT BUTTON. The “Keystone” is displa yed to indicate Keystone mode.
2. Press the POINT UP BUTTON to reduce the upper part of the image, and the POINT DOWN BUTTON to reduce the lower
part. (See “KEYSTONE FUNCTION” section on page 28).
3. Press the NO RMAL BUTTON in keystone mode, the image changed to or iginal image (not correct keystone distortion).