Setting
47
Remote control
This pro jector provides two differen t remot e cont rol
codes: the factory-set initial code (Code 1) and the
secondary code (Code 2). This switching function
prevents remote control interference when operating
several projectors or video equipment at the same
time.
When ope rating the p rojector in "Code 2", bo th the
projector and the remote control must be switched to
"Code 2".
To change the code for the projector:
Select either "Code 1" or "Code 2" in this Setting Menu.
To change the code for the remote control:
Press and hold both th e MENU and I MAGE butt ons
together for 10 seconds or more. After changing the
code, make sure the remote control operates properly.
Remote control