The Raptor 4000-LR and 4000e-LR graphics boards were entirely designed
in-house specifically for ATC tower, military, vessel traffic control and other command and control applications. They offer highly config- urable multi-mode standard resolutions where 2K × 2K displays are not required.
•128 MB frame buffer
•Multi-mode resolution support and layering via 8+8, 8 bit, 24 bit, 8+24 & MOX Modes
•DVI-D (digital) and DVI-I (digital/analog) outputs
•PCI/PCI-X (Raptor 4000-LR) and PCI Ex- press (Raptor 4000e-LR) short form boards
•Comprehensive customer care including long-term technical support
•Support for Linux, Solaris, Tru64 & HP-UX
F E A T U R E S
Multi-Monitor and Multi Resolution Support
The Raptor 4000-LR and 4000e-LR support up to two monitors with two DVI outputs. Both heads support digital monitors and the outer head also drives analog monitors. The maximum resolution is 1920 × 1200 on either head. The cards support DDC/EDID and either head automatically config- ures to the native resolution of DDC compatible monitors. Resolutions can also be set through simple software configuration changes. The drivers are easy to install and the product is readily adapted to your changing needs.
Maximum Performance and Flexibility
With 128 MB of on-board memory and an efficient memory manager, the boards offer excellent draw- ing performance and optimal pixmap management with minimum host CPU usage. These products offer
maximum flexibility supporting more video modes than any other graphics boards currently on the mar- ket. Layering is available through several methods including an 8+8 video mode and MOX (Multiple Overlay eXtension) modes. In addition, traditional video modes such as 8 bit, 24 bit and 8+24 are avail- able and selection is easily achieved through software configuration.
Longest Product Life in its Class
While most vendors’ products are only available for one or two years, Tech Source guarantees Raptor 4000-LR and 4000e-LR availability for at least five years, and support for at least ten years. For system integrators, OEMs and ATC centers, this means sig- nificant savings on development costs by reducing the frequency of configuration re-testing that is necessary when replacing old cards with new ones.
