Multiple Input Support

Input support
includes BNC × 2
(SD-SDI/HD-SDI
× 2 or dual-link
SDI × 1), DVI-D,
and D-Sub for
direct connection
to broadcast and
studio sources as
well as desktop
PCs.
Panel Size and Type
Viewing Angles (H, V)
Brightness
Contrast
On/Off Response Time
Native Resolution
Active Display Size (H × V)
Viewable Image Size
Pixel Pitch
Gamut Coverage
Display Colors
Look-Up Table
Internal Processing
Sceen Uniformity2
Cabinet Color
Dot Clock
Scanning Frequency
(H, V)
Input Signals
Input Terminals
Output Signal
Output Terminals
USB Port / Standard
HDCP Support
Power Requirements
Power Consumption
Power Save Mode
Height Adjustment Range
Tilt / Swivel / Pivot
Dimensions
(W × H × D)
Net Weight
Auto Brightness Functions
Color Modes
Supplied Accessories
Warranty
57 cm (22.5") TFT color LCD panel
170°, 170° (at contrast ratio of 10:1)
380 cd/m2 (maximum)
100 cd/m2 (recommended1)
720:1 (typical)
12 ms (typical)
1920 × 1200
483.8 × 302.4 mm
Diagonal: 570 mm
0.252 × 0.252 mm
sRGB: 97%
Rec709: 97%
EBU: 97%
SMPTE-C: 98%
Adobe RGB: 97%
DCI: 88%
1.07 billion from a palette of 68
billion
12-bits per color
16-bits per color
Entire Screen: ΔE≤3
Black
Analog: 162 MHz, Digital: 162 MHz
Analog: 26 – 92 kHz, 23.8 – 86
Hz (non-interlace), Digital: 26 –
78 kH, 23.8 – 61.0 Hz (VGA
Text: 68 – 71 Hz) (non-interlace)
RGB Analog, DVI Standard 1.0,
SD / HD-SDI (Dual Link)
DVI-D × 1, D-sub × 1, BNC × 2
Single Link × 2 or Dual Link × 1)
SDI SD / HD-SDI (Loop-through
BNC × 2 Single Link × 2 or
Dual Link × 1)
1 up, 2 down / USB 2.0
DVI-D3
AC 100 – 120 V, 200 – 240 V:
50 / 60 Hz
110 W (maximum)
Less than 7 W
118 mm
40° Up, 0° Down / 35° Right,
35° Left
With Stand: 567 × 481 – 599 × 255 mm
Without Stand: 567 × 389 × 113 mm
With Stand: 13.4 kg
Without Stand: 8.8 kg
Auto Brightness Stabilization
Custom, sRGB, EBU, Rec709,
SMPTE-C, DCI, Calibration
AC power cord, signal cables
(DVI-D – DVI-D, DVI-I – D-Sub
mini 15 pin), USB cable, setup
guide, EIZO LCD Utility Disk
(ColorNavigator software, PDF
user's manual), adjustment
certificate, screen cleaner,
quick reference, warranty card
Five Years1
The panel’s wide gamut reproduces
broadcast-standard color spaces such as
PAL/SECAM and HDTV. In addition,
preset color modes for Rec. 709, EBU,
SMPTE-C, DCI, and sRGB are available at
the touch of a button.

Preset Color Modes

With the ColorEdge CG232W, studio
professionals can now conduct all of their
work on one monitor, whereas they
previously needed both a master monitor
for reference (playback) and a desktop
monitor for editing. This offers significant
cost savings, while solving the problem of
trying to match color between different
monitors.

16-Bit Internal Processing

With most LCD monitors, the black level
is usually too bright which leads to
banding and washing out of dark grays.
16-bit internal processing allows the
ColorEdge CG232W to reproduce a high
level of detail in dark areas.

Post-Production and Broadcasting

Monitor for Reference and Editing

3D LUT and 10-bit Simultaneous

Display

A 3D LUT (look-up table) allows for
previewing how colors will be reproduced
on the final film print. 10-bit simultaneous
display means more than 1 billion colors
can be shown on the screen at once. This is
64 times the numbers of colors supported
by standard 8-bit display, and virtually
eliminates color and grayscale banding.
The bundled ColorNavigator calibration
software lets you set the target values for
brightness, white point, and gamma.
ColorNavigator works with a measure-
ment device to directly utilize the monitor’s
3D LUT for accurate calibration in less
than five minutes.

Hardware Calibration

EIZO’s Digital Uniformity Equalizer
function corrects brightness and chroma
uniformity errors to ensure the entire
screen will be practically uniform at each
gray level from 0 to 1,023.

Brightness and Color Uniformity

Additional Features

• High-quality IPS (in-plane switching)
panel with 1920 × 1200 native resolu-
tion and 170
0
viewing angles.
• A panel display frame rate of 120 Hz
virtually eliminates motion artifacts or
“judder” for smooth video playback.
• Backed by a five-year limited manufacturer’s
warranty1 .
D-Sub mini input
DVI-D input
SDI-2 output
SDI-1 output
SDI-2 input
SDI-1 input
USB upstream
USB downstream

57 cm (22.5") Color Calibration LCD Monitor for Video

Specifications
2
1
0
-1
-2
-3
Error Rate (%)
0
2
1
0
-1
-2
-3
128256 384 640 768 8961,023512 0128256 384 640 768 8961,023512
Error Rate (%)
Internal 16-Bit Processing Internal 10-Bit Processing
Tones (0 – 1,023) Tones (0 – 1,023)
1 The usage time is limited to 30,000 hours or less, and the
warranty period of the LCD panel and backlight is limited to
three years from the date of purchase. The warranty period of
the backlight is warranted only if the monitor is used within the
recommended brightness of up to and including 100 cd/m2 with
a color temperature between 5,000 K – 6,500 K and limited to
three years from the date of purchase subject to the usage time
being less than or equal to 10,000 hours.
2 Measured at gray level 128 and color temperature of 5000 K.
3 Display with audio/video devices is not supported.
With current LCD technology, a panel may contain a limited
number of missing or flickering pixels.