16
2. CABLE CONNECTION
2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on
the back of the monitor.

Connecting Examples

SIGNAL1 SIGNAL2
(Ex.1) Analog
D-Sub
mini 15
pin
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C39 enclosed) DVI Digital
(Ex.2) Analog
D-Sub
mini 15
pin
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C16 optional) D-Sub
mini 15
pin
Analog
(Ex.3) Digital DVI
Signal Cable
(FD-C39 enclosed)
Signal Cable
(FD-C39 optional) DVI Digital

Selecting the Active Input

The Input Signal Selection switch on the control panel can be used to select either SIGNAL 1 or SIGNAL
2 as the active input at any time. Every time the switch is touched, the input changes. When switching
the signal, the kind of the input signal (Signal 1 or 2/ Analog or Digital) is displayed for a few seconds on
the right top corner of the screen.
This function is used to select which PC will have priority to control the monitor when utilizing two PCs.
SIGNAL1 SIGNAL2
Input Signal Selection Switch
The monitor constantly checks the input signals and switches automatically in accordance with the
"Input Priority" setting (see table below). Once a priority is set, whenever a change of signal is detected
at the selected input, the monitor will switch the input to that signal.
In the case of only one signal being present at either input, the monitor automatically detects and
displays that signal.