1 INSTALLATION

1-1. Connecting the monitor to the PC

1)Be sure that the power switches of both the PC and the monitor are OFF. 2)Plug the signal cable into the connector at the rear of the monitor.

•When connecting the signal cable or cable adapter, first check that the shape at the cable side matches the shape at the connecting side. After connecting, secure the connection with the screw-in fasteners.

3)Plug the other end of the cable into the video connector on the rear of the PC. Refer to the figures below.

Standard PC graphics board

 

 

 

 

 

 

 

 

 

 

 

 

D-Sub

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mini 15 pin

 

D-Sub

Standard PC graphics board

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mini 15 pin

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal Cable (enclosed)

•About Plug & Play

When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings.

Macintosh

An optional Macintosh adapter should be connected to the PC (if required) before connecting the signal cable. Please consult EIZO dealer.

 

 

D-Sub 15 pin

D-Sub

 

 

mini 15 pin

D-Sub

 

 

mini 15 pin

Macintosh

Signal Cable

 

Macintosh Adapter (Optional)

(enclosed)

 

 

4)Plug the power cord into the power connector at the rear of the monitor. Then plug the other end of the cord into a power outlet.

8 1 INSTALLATION