●To set auto-switching of input signals [Input Signal]

The monitor recognizes the connector through which PC signals are input. When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC.

Priority setting

Function

Auto

When either PC is turned off or enters

 

the power-saving mode, the monitor

 

automatically displays signals of

 

another PC.

Manual

The monitor does not detect the PC’s

 

signals automatically. Select an active

 

input signal with .

 

 

[Input signal setting]

(1)Choose <Others> from the Adjustment menu, and press .

(2)Choose <Input Signal> from the <Others> menu, and press .

The <Input Signal> menu appears.

(3)Select “Auto” or “Manual” with or , and press .

The Input Priority setting is completed.

3-2 Connecting Speaker

1 Connect the stereo mini-jack cable to the audio input connector on the rear of the monitor.

2 Connect the other end of the cable to the audio output connector of a peripheral device such as a PC or CD player.

PC or CD player

●To listen to audio

The input audio can be listened to through speakers or headphones. When headphones are connected, no audio is output from the speakers.

Attention

•When connecting/disconnecting a peripheral device (PC, CD player, etc.) to/from the monitor, be sure to turn off the monitor and the device.

•Use the supplied stereo mini-jack cable to connect a peripheral device.

Chapter 3 Connecting Cables 23