Chapter 5 Reference

5-1 Attaching an Arm (Option)

The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option.

[Attaching]

1 Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.

2 Remove the stand. (Prepare a screwdriver.)

Unscrew the two screws (M4 × 10mm) securing the unit and the stand with the screwdriver.

3 Attach the monitor to the arm or stand.

Secure the stand to the monitor with four screws (M4 × 12mm) using a screwdriver.

Arm

Fixing screws: M4 × 12mm 4 pcs

5-2 Cleaning

Clean the monitor periodically to keep the monitor clean and extend its life.

Cabinet

Clean the cabinet with a soft cloth dampened with little mild detergent.

LCD Panel

•Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper.

•Remove persistent stains gently with a cloth dampened with little water, and then clean the LCD panel again with a dry cloth for better finishing.

Attention

•When using another manufacturer’s arm or stand, confirm the following in advance.

•Clearance between the holes of the arm fixing screws: 100 mm × 100 mm (VESA compliant)

•Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables

•Connect the cables after attaching an arm.

Attention

•Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel.

NOTE

•Optional ScreenCleaner is recommended for cleaning the panel surface.

26 Chapter 5 Reference