Package Contents ________________________________
Please contact your local dealer for assistance if any of the listed items are missing or damaged. Use specified screws for tightening up between arm, fitting and monitor referring to the back of this manual.
z Arm | z Arm Cover x 2 pcs | z Mounting Screws M4 x 8 | (black) x 4 pcs |
z User's Manual | z Stand Mounting Cover | z Mounting Screws M4 x 12 (silver/long) x 4 pcs | |
z Fitting | z | z Mounting Screws M4 x 8 | (silver/short) x 4 pcs* |
*Screws for attaching the monitor with fitting to arm when the monitor’s hole spacing is 100 mm x 100 mm.
Compatible Monitors and Desks ____________________
z Monitors |
|
| 100mm |
|
| M4 | M4 |
Weight Capability* | 2.5 kg to 5.5 kg |
| |
| 75mm | ||
Hole Spacing | 75 mm x 75 mm / 100 mm x 100 mm |
| |
| 100mm | ||
| (VESA compatible) |
| 75mm |
|
|
|
*Weight : Total weight of the monitor including the weight of the cables and optional peripherals.
zDesks
Weight Capability | 50 kg min. (recommended) |
|
|
Thickness and Depth | Refer to right figure | 20~55mm | Desk |
|
|
More than 38mm
How to attach the monitor _________________________
1. Unfold the arm before affixing the arm to the base.
| (For packing) |
| (For mounting) |
| (For packing) | (For mounting) |
2. Clamp the arm to the edge of the desk. |
|
|
| |||
(1) | Press the desk clamp against the edge of |
|
|
| ||
| the desk. |
|
|
|
|
|
(2) | Fit the holes on | the base | of arm to |
|
| Fit the holes |
|
|
|
| Press against |
| |
(3) | Drive two screw | holes by | turns with | Desk |
| |
the desk |
| |||||
|
|
|
| |||
| arm, covering the screw holes with Stand |
|
|
| ||
| Mounting cover. |
|
|
|
|
|
NOTE
zThe arm may not affix firmly to the base if driving either screw in tightly.
zIf attaching the