Chapter 5 Reference

5-1 Attaching an Arm (Option)

The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option.

[Attaching]

1Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.

2Remove the stand. (Prepare a screwdriver.)

Unscrew the four screws securing the unit and the stand with the screwdriver.

3Attach the monitor to the arm or stand.

Secure the monitor to the arm or stand using the screws specified in the user’s manual of the arm or stand.

Fixing screws: M4 × 12mm 4 pcs

Attention

•When attaching an arm or stand, follow the instructions of their user’s manual.

•When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard. Use the M4 × 12 screws supplied with this monitor.

–Clearance between the screw holes: 100 mm × 100 mm

–Thickness of plate: 2.6 mm

–Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables.

•Attach an arm or stand to meet the following tilt angles of the monitor.

–Up 60 degrees, down 45 degrees

–Up 45 degrees, down 45 degrees (vertical display, 90 degrees clockwise)

•Connect the cables after attaching an arm.

•If you need to remove the EZ-UP stand, turn the panel on the monitor to the left and right a little to appear the four screws positioned under the stand. Then unscrew the four screws.

22 Chapter 5 Reference