Prior to use

Installation

Setting/Adjustment

Troubleshooting

Connecting Cables

Attention

When replacing the current monitor with an S1910 monitor, be sure to change the PC settings for resolution and vertical frequency to those which are available for the S1910 monitor referring to the resolution table (back of cover page) before connecting the PC.

NOTE

• When connecting two PCs to the monitor, refer to the User’s Manual on the CD-ROM.

1 Check that the monitor and the PC are powered off.

2 Connect the monitor to the PC with a signal cable that matches the connectors.

After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.

English

Connectors on the

 

Connectors on the

PC

 

monitor

DVI-I connector

Signal cable FD-C39 (supplied)

DVI-D connector

 

Digital connection

 

D-sub mini 15-pin

 

 

connector

Signal cable MD-C87 (supplied)

 

 

Analog connection

D-sub mini 15-pin

 

connector

D-sub 15-pin

Macintosh Adapter (optional) and

 

connector

signal cable MD-C87 (supplied)

 

Analog connection

3 Plug the power cord into a power outlet and the Power connector on the monitor.

Adjusting Screen Height and Angle

Adjust the screen height, tilt and swivel the screen to the best condition for working.

3