20 Chapter 2 Settings and Adjustments
2-6 Power Indicator/EIZO Logo Display Setting● To turn off the Power indicator while a screen is displayed
[Power Indicator Setting]
This function enables to turn off the Power indicator (blue) while a screen is
displayed.
(1) Choose <Others> from the Adjustment menu, and touch .
(2) Choose <Power Indicator> from the <Others> menu, and touch .
The <Power Indicator> menu appears.
(3) Select “Disable” with or , and touch .
The Power Indicator setting is completed.
● To display EIZO logo [EIZO Logo Appearing Function]
When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
[Procedure]
(1) Touch to power off the unit.
(2) Touch again while touching .
The EIZO logo does not appear on the screen.
[Resetting]
(1) Touch to power off the unit.
(2) Touch again while touching .
The logo appears again.
2-7 Beeper Settings● To set the beeper [Beep]
Set the beeper on/off for operation tone of the switches, connection error, etc.
Sound type Conditions for beeping
Short beep • When an item is selected with
• When a maximum or minimum value is set with
the control switches
• When is touched.
Long beep • When is touched.
• When registration is performed with
Consecutive beeps • When the monitor is not connected correctly
• When the PC is not turned on
• When a frequency out of the specifi ed range is
received
Beep-beep once every 15
seconds • 15 minutes before the power off time set by “Off
Timer” (advance notice time)
(1) Choose <Others> from the Adjustment menu, and touch .
(2) Choose <Beep> from the <Others> menu, and touch .
The <beep> menu appears.
(3) Select On or Off with or , and touch .
The beep setting is completed.
NOTE
• The Power indicator lights up at
power on with the default setting.
NOTE
• The logo appears with the default
setting.
S2111W_UM_EN_v1.3.indd Sec4:20S2111W_UM_EN_v1.3.indd Sec4:20 10/23/2006 3:43:44 PM10/23/2006 3:43:44 PM