14 Chapter 2 Settings and Adjustments

2-2 Screen Adjustment

Digital Input

When digital signals are input, images are displayed correctly based on the
preset data of the monitor, but if characters and/or lines appear blurred, go to
step 6 “To modify blurred characters/lines [Smoothing]”. When performing
more advanced adjustment, see “2-3 Color Adjustment” (page 17) and
subsequent pages.

Analog Input

The monitor screen adjustment is used to suppress ickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
The auto adjust function works in the following cases:
•Whenasignalisinputintothemonitorforthersttime
•WhentheresolutionorVertical/HorizontalFrequencynot
displayedbeforeisset
If the screen is not displayed correctly even after performing the auto
adjustment, perform the screen adjustments according to the procedures on the
following pages to use the monitor comfortably.
[Adjustment Procedure]
1 Perform the auto adjustment.
●Toadjustickering,screenposition,andscreensize
automatically [Screen]
(1) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
(2) Choose <Execute> with or , and press .
Flickering, screen position, and screen size are corrected by the auto-
adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafteradjustinginstep
1above,performtheadjustmentsaccordingtotheprocedureson
thefollowingpages.Whenthescreenisdisplayedcorrectly,goto
step5“Toadjustcolorgradationautomatically[Range]”.
2 Prepare the display pattern for the analog display adjustment.
Load the “EIZO LCD Utility Disk” to your PC, and then open the screen
adjustment pattern les.
Attention
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (command prompt window,
for example) or when a black
background (wallpaper, etc.) is in use.
• This function does not work correctly
with some graphics boards.
• “Auto in Progress” appears on the
screen during auto adjustment.
NOTE
• For how to open and contents of the
screen adjustment pattern les, refer
to “Readme.txt”.
Attention
• Wait 30 minutes or more from
monitor power on before starting
adjustments.
• Auto adjust function does not work
for the images under the resolution of
800 × 600 (SVGA).