3.2.2.7 OSD-Menu - Utilities / Installation RGB-Mode
Fig. 22: OSD-Menu - Utilities / Installation RGB-Mode
Function Description RGB DVI
Options Select the RGB installation mode for those timings which are
not part of the internal timing list.
Disabled: use only the internal timing table.
Mode1: use timing parameters and carry out complete
auto adjustment (most frequently used).
Mode 2: use timing parameters and carry out an auto
adjustment; however without an automatic image
position adjustment.
Mode 3: use timing parameters and carry out an auto
adjustment; however without an automatic
frequency adjustment.
Setting range: Disabled, Mode1, Mode2, Mode3
X X
H-visible Horizontal image resolution X X
V-visible Vertical image resolution X X
H-total Number of pixels per line (most important parameter) X X
H-Start Number of pixels from H-sync start to image start X X
V-Start Number of Lines from V-sync start to image start X X
Install Activate installation parameters X X
(X): available for this input signal
3 Operation and Adjustment 37