17
Chapter 2 Settings and Adjustments
2-6 Power Indicator/EIZO Logo Display Setting

● To turn off the Power indicator while a screen is displayed

[Power Indicator]

This function enables to turn off the Power indicator (blue) while a screen is
displayed.
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Power Indicator> from the <Others> menu, and press .
The <Power Indicator> menu appears.
(3) Select “Disable” with or , and press .
The Power Indicator setting is completed.

● To display EIZO logo [EIZO Logo Appearing Function]

When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
(1) Press to turn off the unit.
(2) Press again while pressing to turn on the unit.
The EIZO Logo display/non-display function is toggled.
2-7 Beeper Settings

● To set the beeper [Beep]

Set the beeper on/off for operation tone of the switches, connection error, etc.
Sound type Conditions for beeping
Short beep • When an item is selected with
• When a maximum or minimum value is set with
/ / /
• When is pressed
Long beep • When is pressed
• When registration is performed with
Consecutive beeps • When the monitor is not connected correctly
• When the PC is not turned on
• When a frequency out of the specified range is
received
Beep-beep once every 15
seconds
• 15 minutes before the power off time set by “Off
Timer” (advance notice time)
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Beep> from the <Others> menu, and press .
The <Beep> menu appears.
(3) Select “On” or “Off” with or , and press .
The beep setting is completed.
NOTE
• The Power indicator lights up at
power on with the default setting.
NOTE
• The logo appears with the default
setting.