English

2-2. Getting Ready for Operation

Try each setting procedure if necessary in the following cases.

The display image size and/or position is not appropriate.

→Press the AUTO/FINE MODE button on the front panel for more than 2 seconds.

The AUTO-SIZING function centers the displayed image, aligning the image's borders with respect to the monitor frame. In general, press the AUTO/FINE MODE button whenever changing the graphics card or the resolution (p. 33), or when image size and/or position is incorrect.

NOTE

•Pushing the AUTO/FINE MODE button lightly allows changing of the Fine Contrast mode.

The display area is too large or too small.

→Readjust the refresh rates.

Readjust the preferred refresh rates in accordance with the following look-up-table. Refer to the PC or graphics card manuals on how to change the refresh rates.

[The maximum (non-interlaced) vertical refresh rates for the model]

 

 

Maximum Vertical Refresh rate (Hz)

 

 

640×480

800×600

1024×768

1280×1024

1600×1200

1600×1280

1920×1440

160

160

142

107

92

86

76

NOTE

•About Plug & Play of the monitor

When your computer and monitor support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your monitor into the computer without any manual settings. When your computer system supports Plug & Play, the Display Information File is not required except for installing the Color Profile.

Further adjustment is required

→Adjust the screen using the ScreenManager. (See page 13.)

12 2. INSTALLATION