User’s Manual
TP1 Pointer for Touch Panel Color LCD Monitor
Thank you very much for choosing an EIZO product.
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.
Package Contents____________________________________________________
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
Touch Panel Pointer Pointer Holder Screw for pointer installation × 1 User’s Manual
How to install ________________________________________________________
A driver is required to install the touch panel pointer and pointer holder.
1． Touch Panel Pointer installation
Attach the wire lead of the pointer to the monitor by using the supplied screw.
NOTE
When the monitor has the stand-mounting holes on the rear, attach the TP1 into the lower hole.
When the monitor has the hole exclusively for TP1, attach the TP1 into it. (About the location of hole for TP1, refer to User’s
Manual of the monitor.)
2． Pointer Holder installation
(1) Remove the upper screw from the rear of the monitor.
(2) Insert the stopper of the holder into the ventilation slot of the monitor.
(3) Fix the holder on the monitor by using the screw removed at step (1).
(4) House the pointer into the holder.
Specifications ________________________________________________________
(1) (2) (3) Dimensions Weight Touch Panel Pointer 140 mm (L)× φ 10 mm (5.5” (L) × φ 0.39”) 50 g (1.76 oz) Pointer Holder 24.1 mm (W) × 86.3 mm (H) × 28 mm (D) (0.95” (W) × 3.40” (H) × 1.10” (D)) 10 g (0.35 oz) ■Dimensions Unit: mm (inch)● Touch Panel Pointer ● Pointer Holder
Phone: +81 76 277 6792 Fax: +81 76 277 6793
Phone: +1 562 431 5011 Fax: +1 562 431 4811
http://www.eizo.com
http://www.eizo.co.jp
Copyright© 2003-2014 EIZO Corporation All rights reserved. 6th Edition- January, 2014 Printed in Japan.05D22953F1
(U.M-FP01)