PSP6 INSTALLATION MANUAL ELAN HOME SYSTEMS
Page 4 © ELAN Home Systems 2004 • All rights reserved.
ConnectionsUse high-quality speaker cables to connect the binding posts on
the front panel of the PSP6 to the speaker terminals on the system’s
amplifier(s). Make sure that proper +/- polarity is maintained!
Connect in-wall speaker wire runs to the binding posts on the rear
of the PSP6.
Note: ELAN recommends the use of our BJACK banana plugs for
quick, sure connection of all speakers!
Front
Rear
To Speakers
To Amp
14-18 AWG
Speaker Wire Banana Plugs