Elation Professional 36 PRO

DESIGN LED 36 Pro™

©Elation Professional, Los Angeles Ca. 21 www.ElationLighting.com

visualization when the fixture is mounted in an inverted position.

“d ON” – The display is designed to turn off during normal operation to avoid

excessive light in situations that require an extremely dark environment. This

function will adjust the time delay the fixture will remain on before it turns off. This

function is disabled as default.

8.2 “SEt” – Fixture Personality Settings:

These functions set specific running modes and operating parameters.

<CHAN> DMX Mode settings

This function allows the fixture to run in different DMX channel modes. Three modes are

available; 3 channel, 4 channel, or 6 channel. See “DMX Traits” on page 31 for a

detailed explanation of the different DMX modes.

<dIM> Dimmer Curve Adjustment

This function allow for different dimmer curves to be adjusted. Mode 1 (Mod1) allows for

quicker dimming and Mode 2 (Mod2) allows for smoother dimming which more closely

simulates a tungsten dimming curve.

<FAIL> DMX Fault Protection

This function dictates how the fixture will operate in the event DMX signal is suddenly

lost while operating in DMX mode. The three fail safe modes are; 1) “OFF” which will

blackout all light output. 2) “HOLd,” which will hold the last DMX command, or 3) “AUtO,”

which will put the fixture in sound-active mode.

<dFSE> - Restore Default

This function is used to restore the factory settings of the device. All settings will be set

back to the default values (shaded). Any edited scenes will be lost.

<VEr> Software Version

This function will display the current firmware version.