Design LED 36 Tri-Brick

6.6” (167.5mm)

12.69” (332.5mm)

14.27” (362.5mm) 16.31” (414.5mm)

Design LED 36 Tri-Brick Dimensions

The Design LED 36 Tri-Brick (DLED 36 Tri-Brick)by Elation Professional is a high output, compact (fits in 12” box truss), LED color changer featuring seamless RGB color mixing using 12 x “Tri-color” 3W LEDs, 36 Watts total - 12 Red, 12 Blue and 12 Green. This unit is convection cooled and provides up to 50,000 hours estimated LED life. The DLED 36 Tri-Brick is rated at IP 20, designed for indoor applications only and is fully operational in any mounting position. The unit can be operate from 90-240V and is ac linkable with IEC in/out connectors. Control data input is via 3 pin or 5 pin DMX data first in and out connector cables. The DLED 36 Tri-Brick also features low power consumption, minimal heat emission, no tri-color shadows and flicker-free operation for television and film. The DLED 36 Tri-Brick includes a dual yoke mounting bracket for fixed installation or can be used as a split bracket for floor standing and separated for mounting multiple units together in a line for linear strip design. The unit also features an on board 4 button control menu with 4 digit LED display for setting control address, modes, manual or auto programs. The unit comes fitted standard with a 25° lens kit which produces a 47° field angle effect. Optional wide and narrow lens kits are available.

FEATURES

LED color changer

12 x “Tri-color” 3W LEDs, 36 Watts total - 12 Red, 12 Blue and 12 Green

38.5º Beam Angle

2720 LUX @ 1 meter

350 LUX @ 3 meters

Rated IP 20

Compact Design (fits in 12” box truss)

Convection cooled

Electronic ballast, multi-voltage

IEC Power in/out

Built-in Power Supply and DMX 512 Control

4 Button Electronic Menu

Master/ Slave auto program and music trigger

8 built-in programs with Speed control

Control each L.E.D. independently

TECHNICAL SPECIFICATIONS

DMX Channels: 3, 4, 12 or 15 channel operation modes

Control: USITT DMX-512, 3-pin and 5-Pin XLR serial input/output

Dimmer: Continuous dimming 0-100%

Strobe: Strobe effect (1-18 flashed per second)

IP Rating: IP20

Power Supply: Multi-voltage: 100-240V AC, 50/60Hz On/Off Power switch

Power Consumption: Maximum 65W

Fuse: GMA 220v~2A, electronic ballast

Lamp: 12 Tri-Color, 3 Watt SMDs /

36-Watt Total (12 x Red, 12 x Green 12 x Blue)

Lamp life: Long Life L.E.D. (rated at 50,000 Hours)

Dimensions: (LxWxH): 16.3” x 9” x 3.15” / 415 x 230 x 80mm

Weight: 9.5 lbs. / 4.3 kgs.

Rigging: Mounting bracket and safety eye-hook installed

©Elation Professional • Elation Professional 6122 S. Eastern Ave. Los Angeles, Ca 90040

www.ElationLighting.com • Toll Free (866) 245-6726

Page 1
Image 1
Elation Professional technical specifications Design LED 36 Tri-Brick, Features, Technical Specifications