Protocol Conversion
With many signals coming into the Art SSC and many signal going out, the Show Control page is also the
place where you can program Conversion between di>erent protocols. For example you can program
an Art-Net Source and %t it within an Action that sends out DMX-512, thus creating an Art-Net to DMX-
512 converter.
Templates
The Show Control page provides ready-made Templates for several typical action arrangements.
Templates can be easily copied to the Source list and modi%ed in necessary.
The following table describes the functionality of the templates.
Art-Net DMX Converts Art-Net input universe 1 to DMX Out A and Art-Net input universe 2 to DMX Out
B.
DMX Art-Net Converts DMX input to Art-Net output universe 1.
DMX MIDI Converts DMX input to MIDI output. DMX channels 1-128 are converted to CC messages
on MIDI channel 1. DMX channels 129-256 are converted to CC messages on MIDI
channel 2. DMX channels 257-384 are converted to CC messages on MIDI channel 3. DMX
channels 385-512 are converted to CC messages on MIDI channel 4.
GPI DMX GPI port 1-4 is converted to DMX channel 1-4 on DMX Out A.
GPI MIDI GPI port 1-4 is converted to Note On 1-4 messages on MIDI channel 1.
GPI OSC GPI port 1-4 is converted to OSC “/gpiX” messages.
GPI Art-Net GPI port 1-4 is converted to DMX channel 1-4 on Art-Net output universe 1.
MIDI DMX Converts incoming MIDI to DMX channels.
MIDI Art-Net Converts incoming MIDI to Art-Net channels.
Art-Net Recorder Maps the %rst 16 channels of the 'In A' universe to the playback intensities of the
recorder's memories.
Touch Screen
Recorder
Touch Screen layout with faders to control the playback intensities of the recorder's
memories.
GPI Console Triggering GPI port 1-4 will jump to the corresponding cue in the Console.
OSC RGBW Example OSC actions to match the TouchOSC template that can be downloaded from our
website. This example assumes a RGBW %xture is connected with starting address 1.
OSC Recorder Controls the playback intensities of the recorder's memories by incoming OSC
messages. The OSC URI is /trackX, where X is the memory number.
DMX Splitter The DMX signal from DMX Input is sent out on DMX Outputs A and B.
Production Test This template is used for testing the device during the production process.
eTouch
Creating a eTouch layout is done by creating a 'Touch Screen' action-list and adding actions. For each
action you can choose between various controls like buttons and sliders. The order of the actions will
control the arrangement in eTouch.
22