www.elationlighting.com!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11!!!!!!!!!!!!!!!!!!!!!!!!PIXEL!NET!4™!User!Manual!1.0
CLEANING AND MAINTENANCE CLEANING
The frequency of cleaning depends on the environment in which the device
operates: damp, smoky or particularly dirty environments can cause greater
accumulation of dirt on the device.
• Clean the device with a soft cloth, vacuum, or air compressor to avoid dirt/debris
accumulation. Never use alcohol, solvents, or ammonia based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life.
There are no user serviceable parts inside this device, please refer all other service
issues to an authorized Elation service technician. Should you need any spare parts,
please order genuine parts from your local Elation dealer.
Please refer to the following points during routine inspections:
• A detailed electric check by an approved electrical engineer every 3 months, to
make sure the circuit contacts are in good condition and prevent overheating.
• Be sure all screws and fasteners are securely tightened at all times. Lose screws
may fall out during normal operation resulting in damage or injury.
• Check for any deformations on the housing, rigging hardware and rigging points
(ceiling, suspension, trussing). Deformations in the housing could allow for dust to
enter into the fixture. Damaged rigging points or unsecured rigging could cause
the fixture to fall and seriously injure a person(s).
• Electric power supply cables must not show any damage, material fatigue or
sediments. Never remove the ground prong from the power cable.