©Elation Professional® 12 impression™
6. MOUNTING AND INSTALLATION Mounting
The Impression™ is fully operational in any positions, hanging upside-down from a ceiling,
mounted on its’ side or set on a flat level surface (see illustration below). The following
section will detail the available mounting options. W hen determining a mounting point, be
sure this fixture is kept at least 0.5m away from any flammable materials (decoration etc.).
Always use and install a safety cable as an additional safety measure to prevent accidental
damage and/or injury in the event the clamp fails.
Mounting Cautions:
For added protection mount the fixtures in areas outside walking paths, seating areas, or in
areas were the fixture might be reached by unauthorized personal.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 times the device’s weight.