Elation Professional SD

©Elation Professional® - www.elationlighting.com - SD Disk Drive™ User Manual Page 3 ©Elation Professional® - www.elationlighting.com - SD Disk Drive™ User Manual Page 4

SD Disk Drive™ Safety Precautions

• To reduce the risk of electrical shock or ﬁre, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken.

• Do not attempt to remove or break off the ground prong from

the electrical cord. This prong is used to reduce the risk of electrical

shock and ﬁre in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience recep-

tacles, and the point where they exit from the appliance.

• Cleaning -The ﬁxture should be cleaned only as recommended by

the manufacturer. See page 7 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including ampliﬁers) that produce heat.

• The ﬁxture should be serviced by qualiﬁed service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

SD Disk Drive™ General Instructions

The SD Disk Drive carries a one year limited warranty. Please fill out

the enc losed warranty card to validate your purchas e. All returned

service items whethe r under warranty or not, must be freight pre-

paid and accompany a return authorization (R. A.) number. The R.A.

number must be clearly written on the outside of the return package.

A brief description of the problem as well as the R.A. number must

also be written down on a piece of paper included in the shipping

carton. If the unit is under warranty, you must provide a copy of your

proof of purchase invoice. You may obtain a R.A. number by contact-

ing our customer suppor t team on our customer suppor t number. All

packages returned to the service department not displaying a R.A.

number on the outside of the package will be returned to the shipper.

SD Disk Drive™ Product Registration

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

Keyboard (Sold Separately): You may use any off the shelf PS-2

Keyboard to name scenes, shows, and other profiles in the Show

Designers memory.

Trackball/Mouse (Sold Separately): You may connect any off the shelf

mouse or trackball to the SD Disk Drive. This allows you control the

pan and tilt movements of a selected ﬁxture on the Show Designer.

SD Disk Drive™ Optional Accessories