SERVICE & MAINTENANCE
GAS:OIL MAINTENANCE
*Refer to
BATTERY MAINTENANCE
*Refer to battery charging instructions (pg.15)
BATTERY RECYCLING 
When maintained and used properly, (by following charging and storage guidelines), the Lead Acid Battery used in this product has a normal life span of many miles. When the battery no longer holds a charge or is unable to be charged properly,it should be removed from the GAS CHOPPER SCOOTER™ and delivered to a recycling facility.State Laws prohibit disposal of
CHECK/FILL TRANSMISSION BOX OIL
1.In order to check if there is transmission fluid it must be drained.
2.Remove Fill Bolt(Fig.1)
3.Place Funnel with tube at Drain Bolt.
4.Remove Drain Bolt.
5.Drain oil into a clean container or pan
6.
7.Fill Transimission Box with
GEAR OIL
SPARK PLUG CHECK/REMOVAL/REPLACEMENT
REMOVE SPARK PLUG:
1.Make sure key is not in ignition
2.Locate Spark Plug (Fig. 1)
3.Remove Spark Plug connector. Gently twist and pull off (Fig. 2)
4.Loosen Spark Plug with deep socket wrench then unscrew by hand (Fig. 3)
*(REPEAT STEPS TO REINSTALL SPARK PLUG)
Fig. 1 | Fig. 2 | Fig. 3 |
CHECKING SPARK PLUG |
|
|
1.Make sure there is no oil build up or residue( If there is, spark plug must be replaced) (Fig. 4)
2.Make sure spark plug has proper spark plug gap of (.6mm
3.A spark plug gap measuring tool is needed to ensure proper spark plug gap (Fig. 5)
Check area
for oil
Spark Plug
Fig.4
19
