INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

Record the model, product and serial numbers on the back cover of this instruction book, from the rating plate. This is situated on the lower front frame of the appliance and can be seen upon opening the oven door.

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

INSTALLATION

If your cooker has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your cooker left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the cooker should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the cooker as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation. The cable must have conductors of sufficiently high cross-sectional area to prevent overheating and deterioration.

Six square millimetres (6.00mm²) is the recommended cross-section area.

The cable should be routed away from potentially hot areas marked by X in the diagram below.

To move the cooker, open the main oven door and lift the cooker by holding inside the top of the compartment.

This is a type X appliance which means it is free-standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at either side of the cooker is required to enable the cooker to be moved into position. It is recommended that proprietary trims are fitted to protect the worktops of either side of the appliance. These are available from most DIY stores.

Two spacers have been incorporated into the back of the appliance to ensure an air gap of 10mm is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

7

Page 9
Image 9
Electra Accessories EL 370 manual Introduction, Rating Plate, Installation

EL 370 specifications

The Electra Accessories EL 370 is a notable addition to the world of quality electronic accessories, designed to enhance user experience and deliver exceptional performance across various applications. Whether you're a tech enthusiast or simply looking to improve your everyday gadget usage, the EL 370 stands out with its impressive features and advanced technologies.

One of the main characteristics of the EL 370 is its robust build quality. Constructed with durable materials, this accessory ensures longevity, making it a reliable partner for your devices. The sleek design is not only aesthetically pleasing but also ergonomically optimized, allowing for comfortable handling and usage.

A standout feature of the Electra EL 370 is its compatibility with a wide range of devices. Whether you are using it with smartphones, tablets, or laptops, the accessory effectively integrates with various platforms. This versatility is essential for users who possess multiple gadgets, streamlining the experience across different operating systems.

In terms of technology, the EL 370 incorporates cutting-edge connectivity options. It supports high-speed data transfer, allowing users to share files and media seamlessly without experiencing lag or delays. This feature is particularly beneficial for those who work with large files or require instantaneous data sharing for presentations and collaborations.

Another key characteristic of the Electra EL 370 is its energy efficiency. Designed with modern power management technology, it conserves energy while in use, which not only prolongs the lifespan of the device but also minimizes electricity costs. This aspect resonates well with environmentally conscious users looking to reduce their carbon footprint.

User-friendly functionality is also a major highlight of the EL 370. The accessory offers intuitive controls and easy setup, ensuring that even those who are not tech-savvy can use it without difficulty. This inclusive approach makes it accessible to a broader audience.

The Electra Accessories EL 370 is equipped with intelligent safety features, such as over-current protection and short-circuit prevention, which help safeguard your devices during charging or data transfer. This ensures peace of mind for users who may be concerned about device damage due to power-related issues.

In summary, the Electra Accessories EL 370 combines durability, compatibility, advanced technology, energy efficiency, user-friendly design, and enhanced safety features into a single, reliable accessory. It is an excellent choice for anyone seeking to elevate their electronic experience while ensuring both performance and longevity. With the EL 370, users can look forward to a superior quality product that meets the demands of modern technology.