Disposal after washing
After using, please clean the lint and foreign materials of the lint filter and lint frame in time. Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Cleaning the lint filter
The lint filter must be used during washing.
It must be cleaned in time after each using.
1. Take off the lint filter Put hand at the indicated position. Push down to take it off. (See to
Figure 1)
Figure 1
2. Clean the lint Put it in water and clean while it is still wet.(See to Figure 2)
3. Install the lint filter |
|
| |||
After cleaning, insert the bottom of | Figure 2 | ||||
the | lint | filter (marked | with "down side") | ||
into | the | filter | frame, | then push the |
|
upper part of | the filter in (marked with |
| |||
"up side"). (See to Figure 3) |
| ||||
Figure 3
Attention: be sure not to confuse the direction.
Wipe the complete unit with soft cloth twisted dry.
Wipe with neutral detergent if too dirty.
Do not wash it directly by water.
Petrol Thinner
Alcohol
After washing, dismount the water inlet hose. Pull off the power plug and hang up the power cord.
Do not store water in the tub for long period. Discharge the water immediately after each using.
Wipe off the water drops on the surface and inside the tub with clean soft cloth. Open the cover of the wash tub for some time (about one hour), then close it.
Hang up the drain hose.
Trouble-shooting
The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair.
Phenomena | How to check |
The washing machine | Is there power failure? |
does not act | Is the power plug inserted tightly? |
There's abnormal sound | Is the machine slanting? |
inside the machine. | Is there metal item inside the tub? |
8
