Electro-Voice 6.2 Architecture & Engineering Specs, Block Diagram, Frequency Response, Beamwidth

Models: 6.2

1 2
Download 2 pages 49.32 Kb
Page 2
Image 2
Architecture & Engineering Specs:

Architecture & Engineering Specs:

The loudspeaker shall be a two-way system consisting of two 6” (152mm) low-frequency transducers, a 1” (25mm) high-frequency transducer with a Coherent Coverage Waveguide, and a frequency-dividing network installed in a vented, line-array enclosure. The network shall include a passive limiter for both the low-frequency and high-frequency transducers. The loudspeaker system shall meet the following performance criteria: Power handling, 300-Watts of EIA RS-426A continuous pink noise (6 dB crest factor); Frequency response, 62 Hz - 20 kHz (-10 dB from rated sensitivity); Pressure sensitivity, 94 dB at one watt, 200 Hz -10 kHz at one meter; Impedance,8 ohmsnominal, 6ohmsminimum.Thehigh-frequency transducer shall drive a waveguide to cover evenly 100° horizontally by 90° vertically. The enclosure shall be molded of acrylic butyl styrene. The enclosure shall be 16.5” (419mm) high, 9” (228mm) wide, 11.75” (298mm) deep. The finish shall be a paintable black or white. The grille shall be zinc plated, powder coated for corrosion resistance, and restrained with a safety leash. The loudspeaker shall be adjustable over a range of 100° horizontally and 90° vertically. The support bracket shall be low profile and integral with the enclosure. The system shall be weather resistant to MIL Spec 810 and IEC 529 IP 34 test conditions. The surface mount loudspeaker shall be the Electro-Voice® EVID model 6.2.

Block Diagram:

Frequency Response:

Beamwidth:

+

Passive

HPF

 

Limiter

 

 

 

Directivity:

INPUT

 

LPF

 

 

 

Dimension Drawings:

 

 

 

 

PerformanceMatch:

 

 

EVID 12.1 Sub

 

 

AvailableAccessories:

Front

Side

VS-6

Vertical Mount Desk Stand for 6.2

AB-ZE

Array Bracket Kit for 2 or 4 ZX1i or EVID Systems, Black

 

 

 

 

TC-6B

Black Weatherized Terminal Cover for 6.2

 

 

TC-6W

White Weatherized Terminal Cover for 6.2

 

 

EVID6.2PartNumbers:

 

 

301047-001

Black

 

 

301047-002

White

 

 

301047-003

Black, Transformer

 

 

301047-004

White, Transformer

Top

Wall Plate

 

 

 

12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 12/2005

Part Number 38109-983 Rev E

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at:

800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

Page 2
Image 2
Electro-Voice 6.2 Architecture & Engineering Specs, Block Diagram, Frequency Response, Dimension Drawings, Beamwidth