Electro-Voice technical specifications 635N/D,635N/D-B, Key Features, General Description

635N/D,635N/D-B

Omnidirectional

Dynamic

Microphones

Key Features:

•Neodymium (N/DYM® ) Magnet Provides Greater Output than with Standard Ferric Magnets

•Rugged Design

•Choose Nonreflecting Fawn Beige or Semigloss “Camera” Black

•Comes Complete with Stand Adapter

General Description:

The Electro-Voice® 635N/D and 635N/D-B dynamic omni directional microphones are offspring of the legendary 635A microphone. Built with the same rugged design of the 635A, the 635N/D and 635N/D-B offer a neodymium N/DYM® magnet structure for greater sensitivity. Designed for increased ruggedness to meet the demands of exacting professional applications, the 635N/D’s and 635N/D-B’s are ideally suited for electronic news production (ENG), electronic field production (EFP), television, film and radio remotes and demanding PA applications.

The microphone’s Acoustalloy® diaphragm permits a very smooth response over a wide frequency range, yet it withstands high humidity and temperature extremes, corrosive effects of salt air and severe mechanical shocks. The diaphragm is protected from dust and magnetic particles by a carefully designed integral windscreen and blast filter. The windscreen provides excellent protection from wind noise, excessive sibilance and annoying “P-popping.” This helps minimize the need for an external windscreen for outdoor use.

The 635N/D comes in nonreflecting fawn beige; the 635N/ D-B comes in semi gloss black for “on camera” use. The increased output level and low sensitivity to mechanical shock make the 635N/D and 635N/D-B excellent for interviews, sporting events, special effects and voice-overs.

Both microphones come with the 311 stand adapter.

Technical Specifications:

Generating Element:	Dynamic N/DYM® Magnet Structure
Frequency Response:	80 - 13,000 Hz
Polar Pattern:	Omnidirectional
Impedance (Low):	150 ohms
Sensitivity, Open Circuit	2.8 mV/pascal
Voltage:
Microphone Connector:	3 pin, XLR-type
Polarity:	Pin 2 will be positive referenced to Pin
	3 with positive pressure on diaphragm
Case Material:	Steel
Dimensions,
Length:	148 mm (5.84 in.)
Max. Diameter:	36 mm (1.42 in.)
Finish:	635N/D - Fawn Beige
	635N/D-B - Semi-gloss "Camera" black
Net Weight:	170 g (6 oz)
Shipping Weight:	584 g (20.6 oz)
Accessories Included:	311 Stand Adapter
Optional Accessories:	314E Windscreen