Electro-Voice CPS2.11 technical specifications Key Features, General Description, Power Amplifier

CPS2.11

High-Efficient, Lightweight

Two-Channel

Power Amplifier

Key Features:

•2 x 1600W/2 Ohms

•High Efficient Class-H Design

•2 U Rack Space

•Detend Rear Level Controls

•Complete Protection Package

•Dynamic Limiter

•Phoenix Type Inputs

•Barrier Outputs

•Retrofit Signal Processing Kits

•Remote Power On/Off

General Description:

The Electro-Voice® CPS2.11 is from the Contractor Precision Series of professional amplifiers. The high efficient Class-H design reduces the power dissipation significantly and allows for more amplifier channels and output power in a given rack space.

The audio performance of the CPS2.11 is state-of-the art and fulfills the highest sound expectations in demanding applications from concert sound to theater. The CPS2.11 features the same complete protection package as all EV Precision Series ampli- fiers. Protection against: excessive HF, DC fault, high tempera- ture, and Back-EMF as well as turnon delay, peak current and inrush current limiters. In addition to the rated output power the CPS2.11 provides up to 30% percent headroom for a wide dynamic range on music signals. The onboard dynamic limiter ensures that the output clipping of the CPS2.11 will not exceed a THD of 1% up to an input signal of +21dBu. Detented level controls on the rear panel provide precise (1dB-detend) and repeatable settings.

Front panel LEDs indicate signal present, 0 dB, and limit. Female XLRs and Phoenix type connectors for inputs and barrier strips for outputs provide an easy rack wiring. The power on/off function of the CPS2.11 can be remote controlled via a 24V DC source. Optional x-over cards for biamp operation (e.g. a 2-way cinema system) can be retrofitted.

Technical Specifications:

Load Impedance:	2 Ohms		4 Ohms	8 Ohms
Maximum Midband Output Power	1600W		1100W	600W
(THD = 1%, 1 kHz, Dual Channel):
Rated Output Power	-		900W	450W
(THD = 0,1 %, 20 Hz - 20 kHz):
Maximum Bridged Output Power	-		3200W	2200W
(THD = 1%, 1 kHz):
Maximum RMS Voltage Swing			78V
(THD = 1%, 1 kHz):
Power Bandwidth		10 Hz - 60 kHz
(THD = 1%, 1 kHz, Half Power @ 4 Ohms):
Voltage Gain ref. 1 kHz:			32.0 dB
Input Sensitivity	+5.8 dBu (1.51 Vrms)
(@ Rated Power, 8 Ohms, 1 kHz):
THD @ Rated Output Power		< 0.05%
(<0.1%, CPS2T@100V):
IDE-SMTP (60 Hz, 7 kHz):		<0.02%
DIM 30 (3.15 kHz, 15 kHz):		<0.05%
Maximum Input Level:	+22 dBu (9.76 Vrms)
Crosstalk (ref. 1 kHz, Rated Output Power):			<-80 dB
Frequency Response (+/- 1 dB, ref. 1 kHz):		15 Hz - 40 kHz
Input Impedance Active Balanced:			20 kOhms
Damping Factor @ 1 kHz:		>300
Slew Rate:			35 V/us
Signal-to-Noise Ratio (A-Weighted):			107 dB
	240V, 230V, 220V, 120V, or
Power Requirements1:	100V; 50 - 60 Hz
	(Factory Configured)
Power Consumption:			820W
Power Dissipation	396W (1350 BTU/hr)
(1/8 Max. Output Power @ 4 Ohms):
	Audio Limiters, High Temperature,
Protection:	DC, HF, Back-EMF, Peak Current
	Limiters, Inrush Current Limiters,
		Turn-On Delay
Cooling:	Front-to-Rear, 3-Stage Fans
Dimensions (W x H xD):	483mm x 88.1mm x 368.8mm
	(19” x 3.5” x 15.22”)
Net Weight:	8.15 kg (17.96 lbs)
Shipping Weight:	9.65 kg (21.26 lbs)

-Amplifier at rated conditions, both channels driven, 8 ohm loads, unless otherwise specified.

1 Factory Configured.