Electro-Voice DH7-8, DH7-16 General Description Cont’, Dimension Drawings Cont’

General Description (Cont’): Frequency Response (On a Tube):

Pure aluminum rectangular voice coil wire is used to obtain the highest sensitivity. Proprietary bonding and winding technologies assure unsurpassed reliability and performance of all DH7 diaphragm assemblies.

Electro-Voice’s commitment to precision compression driver manufacturing and modern design techniques assure the DH7 user the highest level of audio and engineering excellence.

	Note: Frequency response and impedance of the DH7-16 driver attatched to a
	38mm (1.5”) diameter plane wave tube, using one watt input (4 Vrms).
Dimension Drawings:	Frequency Response (On an HP94 Horn):

Top View

Note: Frequency response and impedance of the DH7-16 driver attached to an HP94 Horn, measured on axis in the far field using one watt input (4 Vrms). SPL calculated to 1 meter equivalent by inverse square law.

Dimension Drawings (Cont’):

Side View

Side View (Shown with Optional ADH-6 Adapter)

Bottom View

Accessories:

• ADH-6 Adapter (For 2” Exit) 591183-102

(must be purchased separately)

DH7-8 Part Number: 827-3389

DH7-16 Part Number: 827-3390

12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 2/2002

Part Number 38110-095 Rev. A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at:

800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.