Frequency Response:

Polar Response:

Standard Placement & Use Guidelines

1. Always point the microphone at the desired source of sound, and away from any unwanted sources.

2.The microphone should be located close to the sound source to minimize interference from other potential sound sources.

3.Use the 3-to-1 rule when using multiple microphones. Place each microphone three times farther from other microphones as from the desired sound source.

4.Minimize over-handling of the microphone to reduce unwanted mechanical noise.

5.Working close to the microphone will increase the bass tone and also provide increased gain-before-feedback.

Powering the ENG618:

The ENG 618 is powered by an external 12 - 52 volt phantom power supply or 9-V battery. The battery is needed to operate the headphone amplifier circuit. Initial use of the battery circuit, causes the low-battery indicator to flash momentarily. The lowbattery LED remains on when the voltage drops indicating a need to replace the battery.

To operate the ENG 618, use high-quality balanced cable with XLR connectors to connect the electronics housing to the mixer input. If the mixer is supplying phantom power, this will power the ENG 618 with or without the 9-V battery. Without phantom power the ENG 618 requires a 9-V battery.

An 1/8-in. mini-plug may be used to connect an 8-ohm stereo headphone to the ENG 618. Plugging into the headphone jack automatically switches on the battery power to the volume-adjustable headphone amplifier. This allows the operator to hear the “sound field”through the headphones whether on-line via the XLR connector or not. This can be very useful when doing a background environmental sound check before the actual “on-air” use.

The headphone jack could also be used to connect to a portable tape recorder for quick minimal equipment coverage.

Each segment of the telescoping boom pole can be secured with a twist of the collet at any position along its length. By loosening, the segments can collapse quickly into each other. Folding the microphone toward the handle allows the unit to locate into the base for storage.

ENG 618 Part Number: 16063042

12000 Portland Avenue South, Burnsville, MN 55337 Phone:952/884-4051, Fax:952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 1/2004

Part Number 534897 Rev B

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at:

800/553-5992 or 402/467-5321 For technical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656

Specifications subject to change without notice.

Page 1
Page 2
Image 2
Electro-Voice ENG 618 Frequency Response, Powering the ENG618, Part Number 534897 Rev B, + 49 9421-706 0 Fax + 49 9421-706
Page 1

ENG 618 specifications

The Electro-Voice ENG 618 is a cutting-edge microphone designed specifically for field production and broadcast applications. Renowned for its reliability and high-quality audio capture, the ENG 618 is ideal for on-location interviews, live reporting, and high-pressure environments where sound clarity and performance are paramount.

One of the standout features of the ENG 618 is its hypercardioid polar pattern. This design effectively isolates the desired sound source while minimizing background noise, making it perfect for capturing speech in bustling environments. Its targeted pickup pattern ensures that the microphone focuses on the speaker, which is crucial in noisy settings like public events or crowded locations.

Equipped with a frequency response of 40 Hz to 20 kHz, the ENG 618 delivers a rich and balanced audio reproduction. This wide frequency range ensures that it captures both the lows and highs of the human voice, maintaining clarity and definition, even in challenging acoustic environments. Its high sensitivity allows for excellent performance with minimal amplification, reducing the chances of distortion.

The ENG 618 also incorporates advanced handling noise rejection technology. This feature is especially beneficial when the microphone is used on the move or handheld, as it minimizes unwanted noise caused by physical handling or wind impact. The microphone's robust construction is designed to withstand the rigors of field use, ensuring durability and longevity in various environmental conditions.

Another key aspect of the ENG 618 is its easy-to-use interface. The microphone is compatible with various audio equipment, including mixers and cameras, making it a versatile choice for professionals. The lightweight design contributes to ease of use, allowing users to maneuver it comfortably for extended periods without fatigue.

Moreover, the ENG 618's build quality reflects Electro-Voice's commitment to excellence. With a rugged metal housing, the microphone is designed to endure the tough conditions often encountered in electronic news gathering. In addition, it comes with an integrated pop filter that effectively reduces plosive sounds, further enhancing overall audio quality.

In summary, the Electro-Voice ENG 618 is an exceptional microphone tailored for ENG professionals. Its advanced technologies, user-friendly features, and robust design make it a reliable choice for anyone looking to achieve high-quality sound in demanding situations. Whether on the street, in a studio, or in the field, the ENG 618 stands out as a top-tier audio solution.
Top Page Image Contents