EVA-1151D
Single 15”
Subwoofer
Line-Array Module
Key Features:
• Compact design rigs with EVA full-range modules
• Hidden suspension hardware (included) is aesthetically pleasing
• Three finishes available — standard, PI, and fiberglass
• 98 dB sensitivity
• 500 W continuous power capacity (2,000 W peak)
• 125/131 dB maximum SPL (continuous/peak)
• EVADA (EVA Design Assistant) software tool available
General Description:
The Electro-Voice EVA-1151D is a high-power, front-loaded sub- woofer module for use with EVA full-range line-array modules. It can be arrayed on top of an EVA full-range array using an EVA- SG2 standard or EVA-EG2 extended grid, or behind a full-range EVA array using the EVA-CG coupler grid, which allows subs to be flown in the array without increasing trim height. Up to three EVA-1151D subwoofer modules and five full-range modules may be flown in this configuration from a single hang point. The unique acoustic and integrated rigging design of the EVA series also al- lows for construction of vertical arrays up to eight modules high using any combination of EVA-1151D and/or EVA-2082S modules. For rigging information please refer to the EVA User Manual avail- able at www.electrovoice.com.
The EVA-1151D has been designed exclusively for fixed installa- tion applications. The DVX3159A 15” woofer is specially designed for subwoofer duty to provide reliable low-frequency performance with solid impact and low distortion at high sound pressure levels. The enclosure is constructed of 18-mm 13-ply birch plywood re- inforced with internal steel rigging top to bottom and coated with EVCoatTM for durability and professional appearance. PI versions are available for indirect outdoor exposure or fiberglass (FG) versions for severe exposure applications. PI and FG versions include the CDG dual-gland-nut input panel cover and stainless steel three-layer grille. The innovative input panel provides a choice of Phoenix/Euroblock connectors, optional CDNL4 cover plate with dual NL4-type connectors or the CSG single-gland-nut plate for use with cable. Enclosure side-panel covers conceal all suspension hardware and provide a smooth, monolithic appear- ance. In keeping with the modular building-block philosophy behind EVA series loudspeakers, intermodule tie plates included with the EVA-1151D provide for splays of 0° or 5° between subwoofer modules to help accommodate the wide variety of array configurations possible, including stand-alone subwoofer arrays. For array design please refer to the EVA Design Assistant (EVADA) software available at www.electrovoice.com.
Technical Specifications:
Freq. Response1 (-3 dB): | 48 Hz - 250 Hz | |
Freq. Range1 (-10 dB): | 35 Hz - 250 Hz | |
Rec. High-Pass Frequency: | 35 Hz, 24-dB-per-octave Butterworth |
Axial Sensitivity3: | 98 dB (1 W/1 m) | |
Max. Calculated SPL1: | 131 dB | |
Power Handling2: | 500 W continuous, 2000 W peak |
Crossover Frequency: | 80 - 125 Hz, 100 Hz typical |
LF Transducer: | DVX3159A, 15” (381 mm) driver |
Impedance: | 8 ohms (nominal), 5.3 ohms (min.) |
Connectors: | Dual 4-pin 10 | | PI/FG Versions - |
| AWG Phoenix/ | | CDG gland-nut |
| EuroBlock | | input panel cover |
| screw-terminals | | included |
Enclosure: | 13-ply weather- | | FG Version - 13-ply |
| resistant birch | | weather-resistant |
| with EVCoatTM | | birch with fiber- |
| | | glass finish |
Grille: | 16 GA powder- | | PI/FG Versions - |
| coated galvanneal | | Stainless steel |
| | | with hydrophobic |
| | | cloth |
Environmental: | IEC 60529 IP55 for PI and FG versions |
Suspension: | EVA-SG2 grid (sold separately) |
| EVA-EG2 grid (sold separately) |
| EVA-CG grid (sold separately) |
| EVA-GXB extra spreader bar (sold |
| separately) | |
Dimensions (H x W x D): | 23.5” x 23.5” x 18.2” | |
| (597 mm x 597 mm x 462 mm) |
Net Weight: | 89.1 lb (40.4 kg) | |
Shipping Weight: | 98.9 lb (44.9 kg) | |
1Half-space measurement.
2AES-1984, tested for eight hours.
3Arithmetic average, 55 - 110 Hz, half-space measurement.