Electro-Voice EVA-2082S/1220 technical specifications Key Features, General Description

EVA-2082S/1220

Dual 8” Two-Way

120° x 20° Full-Range

Dual Element

Line Array Module

Key Features:

• True Line Array Performance

• 120° Horizontal Coverage Pattern

• 20° Vertical Coverage Pattern

• 104 dB Sensitivity

• Hidden Suspension Hardware (Included) is Architecturally Pleasing

• 3 Finishes Available - Indoor, PI, and Fiberglass

• EVADA (EVA Design Assistant) Software Tool

• Single Amplifier Channel Drive Configuration for Entire Array

• Advanced 6th Order Crossover Network with HF Protection

General Description:

The Electro-Voice® EVA Series (Expandable Vertical Array) is designed to provide full bandwidth, well defined coverage from easily created line arrays using four different preconfigured 2-way modules. Two verti- cal coverage angles, 6° and 20°, can be combined to create line arrays optimized for spaces ranging from 12m (40ft) to greater than 60m (200ft) deep. Two horizontal coverage angles, 90° and 120°, provide the perfect match for any width. Each module consists of two elements, each 2-way element containing an 8” woofer and two compression drivers mounted on a hydra/waveguide combination. High order passive networks couple the element’s transducers, and the array element to additional elements to provide plane wave radiation and response equal to DSP-driven high end systems. Impedance management allows full array drive (up to 4 modules) from a single amplifier channel at 4 ohms. Matching sub- woofer module is available when response below 50 Hz is required. EVA systems can be used in a variety of fixed installation applications where high quality sound reinforcement and even coverage are required from a compact , lightweight, unobtrusive array.

EVA-2082 modules utilize four DH2005 high output 1.25” titanium com- pression drivers, mounted on two Hydra® plane wave generators and two waveguides. The result is smooth response to 20 kHz and excellent pattern control in both planes.

The EVS2008 8” woofer is designed for line array use to provide very low distortion and maximum intelligibility at high SPL levels. The crossover features steep 36 dB/octave slopes with equalization for very smooth re- sponse in the vocal range, extended HF, and a protection circuit for long term reliability. It includes a user definable shading capability to finely adjust the line array to the audience area.

(General Description continued on next page.)

Technical Specifications:

Freq. Response1 (-3 dB):	60 Hz - 19 kHz
Freq. Range1 (-10 dB):	45 Hz - 20 kHz
Rec. Hipass Frequency:	50 Hz
Axial Sensitivity2:	104 dB (1W/1m)
Max. Calculated SPL2:	129 dB Continuous, 135 dB Peak
Horizontal Coverage:	120°
Vertical Coverage:	20°
Power Handling:	350W Continuous, 1400W Peak
LF Transducer:	(2) EVS2008, 8 in (203mm) Driver
HF Transducer:	(4) DH2005, 1.25 in (32mm)
	Diaphragm Compression Driver
Crossover Frequency:	1740 Hz
Nominal Impedance:	16 Ohms
Minimum Impedance:	12 Ohms
Connectors:	(2) 4 Contact 10	PI Version -
	AWG Phoenix/	Gland Nut with
	EuroBlock Style	Included Input
	Screw Terminals	Panel Cover
Enclosure Material:	Plywood with EVCoatTM
Grille:	16 GA Galva-	PI Version -
	nneal, Powder-	Stainless Steel
	coated	with Hydrophobic
		Cloth
Suspension:	EVA Grid (Sold Separately)
Dimensions (H x W x D):	20.17” x 23.50” x 14.53”
	(512.2mm x 596.9mm x 369.1mm)
Net Weight:	76.2 lbs (34.6 kg)
Shipping Weight:	85.5 lbs (38.8 kg)

1Full Space Measurement.

2Full Space Measurement of 3 Elements. SPL Adjusted for 1m Distance.