Architects’ & Engineers’ Specifications: | Frequency Response: |
The loudspeaker shall be a single driver system consisting of one 12-inch (300 mm) low-frequency and frequency-dividing network installed in a vented, slot-loaded enclosure. The LF transducer shall have dual voice coils to allow for stereo (L/R) inputs. The network shall include crossed-over outputs for up to 4 satellite speakers. The loudspeaker system shall meet the following performance criteria: Power handling, 175 watts long-term program per voice coil using EIA RS-426A pink noise (6 dB crest factor). Frequency response, 40 Hz–140 Hz (-10 dB from rated sensitivity). Pressure sensitivity, 106 dB at one watt, 100 Hz–10 kHz at one meter. Impedance, 8 ohms nominal, 6 ohms minimum. The enclosure shall be MDF and constructed with both glue and steel fasteners. The enclosure shall be 16.5" (412 mm) high, 23" (584 mm) wide, 12" (305 mm) deep. The finish shall be a paintable black or white. The grille shall be acoustically transparent foam. The support bracket shall be low profile and integral with the enclosure. The cabinet shall be designed for ceiling mounting with additional accessory materials. All standard mounting hardware shall be included for wall or corner placement. The loudspeaker shall be the Electro-Voice ® EVID model 12.1.
Block Diagram: | | | | | | Impedance: |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
To Satellites
Max. 2 Per Channel
(4 Total)
Dimension Drawings:
Top View | | PerformanceMatch: |
| | • | EVID 3.2(t) Surface Mount Speaker |
| | • | EVID 4.2(t) Surface Mount Speaker |
| | • | EVID 6.2(t) Surface Mount Speaker |
| | • | CPS-1 Power Amplifier |
| | • | CPS-2 Power Amplifier |
| | • | CPS-2T Power Amplifier |
| | • | MA-1206 Mixer Amplifier |
| | • | MA-1212 Mixer Amplifier |
| | EVID12.1PartNumber |
| | • | 301048-001 |
| Front View | Side View | Rear View | |
12000 Portland Avenue South, Burnsville, MN 55337 Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 10/2002
Part Number 38109-984 Rev B
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at:
800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
