What is the power rating of the EVID 12.1P speaker system?

The amplifier power is rated at 300 watts long-term program using EIA RS-426A pink noise with a 6 dB crest factor.

What material is the enclosure of the EVID 12.1P speaker system made of?

The enclosure is made of MDF and constructed with both glue and steel fasteners.

Does the EVID 12.1P speaker system come with mounting hardware?

Yes, all standard mounting hardware is included for wall or corner placement.

Block Diagram, Dimension Drawings, Top View

Architects’ & Engineers’ Specifications:

Frequency Response:

The loudspeaker shall be a single driver system consisting of one 12-inch (300 mm) low-frequency and frequency-dividing network installed in a vented, slot-loaded enclosure. The loudspeaker system shall meet the following performance criteria: Amplifier Power: 300 watts long-term program using EIA RS-426A pink noise (6 dB crest factor). Frequency response, 42 Hz–160 Hz (-10 dB from rated sensitivity). The enclosure shall be MDF and constructed with both glue and steel fasteners. The enclosure shall be 16.5" (412 mm) high, 23" (584 mm) wide, 12" (305 mm) deep. The finish shall be a paintable black or white. The grille shall be acoustically transparent foam. The support bracket shall be low profile and integral with the enclosure. The cabinet shall be designed for ceiling mounting with additional accessory materials. All standard mounting hardware shall be included for wall or corner placement. The loudspeaker shall be the Electro-Voice ® EVID model 12.1P.

Block Diagram:

(Crossover

Frequency)

Volume

Line

InVariable

Limiter

Crossover

Dimension Drawings:

Line

Out

High Pass

Out

Top View

PerformanceMatch:

• EVID 3.2(t) Surface Mount Speaker

• EVID 4.2(t) Surface Mount Speaker

• EVID 6.2(t) Surface Mount Speaker

EVID12.1PPartNumber

• 301364-001

Front View

Side View

12000 Portland Avenue South, Burnsville, MN 55337 Phone:952/884-4051, Fax:952/884-0043

www.electrovoice.com

Part Number 38110-200 Rev A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at:

800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

Electro-Voice EVID 12.1P Block Diagram, Dimension Drawings, Frequency Response, PerformanceMatch

Models: EVID 12.1P