Architecture & Engineering Specs:

The loudspeaker shall be a two-way system consisting of two 4” (102mm) low-frequency transducers, 1” (25mm) high-frequency transducer with a Coherent Coverage Waveguide, and frequency-dividing network installed in a vented, line array enclosure. The network shall include a passive limiter for both the low frequency and high frequency transducers. The loudspeaker system shall meet the following performance criteria: Power handling, 200 watts of EIA RS-426A continuous pink noise (6 dB crest factor); Frequency response, 65 Hz – 20 kHz (-10 dB from rated sensitivity); Pressure sensitivity, 89 dB at one watt, 200 Hz – 10 kHz at one meter; Impedance, 8 ohms nominal, 6 ohms minimum. The high frequency transducer shall drive a waveguide to evenly cover 120° horizontally by 80° vertically. The enclosure shall be molded of acrylic butyl styrene. The enclosure shall be 12.2” (310mm) high, 6.9” (175mm) wide, 8.5” (216mm) deep. The finish shall be a paintable black or white. The grille shall be zinc plated, powder coated for corrosion resistance, and restrained with a safety leash. The loudspeaker shall be adjustable over a range of 100° horizontally and 90° vertically. The support bracket shall be low profile and integral with the enclosure. The system shall be weather resistant to MILSpec 810 and IEC 529 IP 34 test conditions. The surface mount loudspeaker shall be the Electro-Voice® EVID model 4.2.

Block Diagram:

+

Passive

HPF

Limiter

 

 

 

 

LPF

INPUT

Dimension Drawings:

Frequency Response:

Beamwidth:

Directivity:

PerformanceMatch:

 

 

• EVID 12.1 Sub

 

 

AvailableAccessories:

 

 

HS-3

Horizontal Mount Desk Stand for 3.2/4.2

 

Side

VS-4

Vertical Mount Desk Stand for 4.2

Front

AB-ZE

Array Bracket Kit for 2 or 4 ZX1i or EVID Systems, Black

 

 

TC-4B

Black Weatherized Terminal Cover for 4.2

 

 

TC-4W

White Weatherized Terminal Cover for 4.2

EVID4.2PartNumbers:

301046-001 Black

301046-002 White

301046-003 Black, Transformer

301046-004 White, Transformer

Top

Wall Plate

12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 12/2005

Part Number 38109-982 Rev E

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at:

800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

Page 2
Image 2
Electro-Voice EVID 4.2 Architecture & Engineering Specs, Block Diagram, Dimension Drawings Frequency Response