PA2450L
Two-Channel
Power Amplifier
Key Features:
•2 x 450W at 4 Ohms
•2 U Rack Space Chassis
•Rear Level Controls
•Bridge Mode Operation Provides 1 x 900W at 8 Ohms
•Complete Protection Package
•Selectable 50Hz or 300Hz
•PhoenixType Inputs
•Phoenix Type Outputs
•High Efficiency Circuit Design
•Front Panel Power On/Off
General Description:
The
The PA2450L features many of the same comprehensive protection circuits typical in EV amplifiers. Complete protection is provided for high temperature, audio limiters, power up delay and peak current limiters. In addition to the rated output power, the PA2450L provides excellent headroom for a wide dynamic range on music signals. The onboard dynamic limiter ensures that the output clipping of the PA2450L will not will not generate excessive distortion. The amplifier channels can be bridged for more power flexibility.
Marked level controls on the rear panel provide hidden reliable level adjustments for each channel. Front panel LEDs indicate signal present, 0 dB, and limit. Phoenix type connectors for inputs and outputs provide an easy rack wiring.
Technical Specifications:
Number of Channels |
| 2 | |
Load Impedance | 8 Ohm |
| 4 Ohm |
Rated Output Power (*Rated Load) | 220W |
| 450W |
THD<1%, 1kHz |
|
|
|
Rated Output Power (*Rated Load) | 200W |
| 400W |
THD<0.2%, 20Hz … 20kHz |
|
|
|
Slew Rate at 1kHz | 28V/µs | ||
Frequency Response, | <10Hz - 40kHz | ||
Damping factor, at 100Hz / 1kHz, |
| >250 | |
4 Ohm |
|
|
|
Power Bandwidth THD=1%, Ref. | >10Hz - >50kHz | ||
1kHz, Half Power |
|
|
|
Input Impedance, 20Hz ... 20kHz, | >20kOhm | ||
Balanced |
|
|
|
104 dB | |||
Input Sensitivity at Rated Output | 0dBu (775mV) | ||
Power or Voltage, 1kHz |
|
|
|
THD at rated output power, |
| <0.1% | |
MBW=80kHz, 1kHz |
|
|
|
| <0.1% | ||
DIM30, 3.15kHz, 15kHz |
| <0.1% | |
Crosstalk, Ref. 1kHz, at 10% Rated | |||
Output Power |
|
|
|
Power Requirements | 120V or 230V, 50Hz - | ||
|
| 60Hz | |
Protection | Audio Limiters | ||
| High Temperature | ||
| Peak Current Limiters | ||
| |||
Cooling | |||
Dimensions (W x H x D), mm | 483 x 88 x 406mm (2Ru) | ||
| 19" x 3.5" x 16" | ||
Weight | 16.5kg (36.34lbs) |
Low Impedance Outputs:
-Min. Rated Load for Single Channel Operation is 4 Ohms. 2 Ohm Load is Not Recommended.
-Min. Rated Load for Bridged Operation is 8 Ohms. 4 Ohm Load is Not Recommended.