Electro-Voice PX1152M technical specifications General Description, Technical Specifications

PX1152M

15” Two-Way Dual

Manifolded HF

90° x 45° Full Range

Loudspeaker System

Key Features:

•Dual ND2 2”Voice Coil, 1” Exit Neodymium Compression Drivers

•DVX3151 15” LF Transducer with Forced Air Cooling

•Very High Sensitivity, 134 dB Maximum SPL

•Ultra-Compact, Low Profile, Multipurpose Design

•90° x 45° Coverage Pattern

•600W Continuous (2400W Peak) Power Handling

•Passive/Biamp Selectable

•Integral Rigging Point for VSA-1 Strong Arm

•Pole Mount for Tripod Use

General Description:

The Electro-Voice®PX1152M is a versatile fullrange, 2- way floor monitor loudspeaker system that is part of the Electro-Voice®Phoenix Series and is intended for high output sound reinforcement in a large range of portable sound applications. The PX1152M is capable of being configured as either passive or biamp, and can be used fullrange for stage monitor applications or used with a subwoofer as a very compact system with extended low frequency capability.

The PX1152M uses the DVX3151 woofer, a high efficiency 15-inch woofer with forced air cooling. Dual ND2-16 compression drivers are precisely summed in a manifold for increased power handling, maximum SPL, and low distortion. The very low distortion 90° x 45° horn provides optimal coverage in the PX1152M’s configurations. The enclosure is constructed of 18-mm, 13-ply plywood, using tongue and groove joints and EVCoatTM for long term durability.

As a stage monitor, the PX1152M provides symetrical left and right 60° monitor angles, and NL4 connectors on each side of the enclosure for connecting multiple monitors. An integrated rigging point allows for installation on a truss using the VSA-1 strong arm accessory.

Technical Specifications:

Freq. Response1 (-3 dB):	70 Hz - 15 kHz
Freq. Range1 (-10 dB):	50 Hz - 19 kHz
Rec. Hipass Frequency:	45 Hz
Axial Sensitivity1:	100 dB (1W/1m)
Max Calculated SPL1:	134 dB
Horizontal Coverage:	90°
Vertical Coverage:	45°
Power Handling (Passive):	600W Continuous, 2400W Peak
LF Power Handling (Biamp):	500W Continuous, 2000W Peak
HF Power Handling (Biamp):	80W Continuous, 320W Peak
LF Transducer:	(1) DVX3151, 15 in. (381mm) Driver
HF Transducers:	(2) ND2-16, 2 in. (50mm) Diaphragm
	Compression Drivers
Crossover Frequency:	1400 Hz
Impedance (Passive):	8 Ohms Nominal
LF Impedance (Biamp):	8 Ohms Nominal
HF Impedance (Biamp):	8 Ohms Nominal
Connectors:	(3) Neutrik Speakon NL4's
Enclosure Material:	18mm Plywood with Black EVCoatTM
Suspension:	Rigging Point for VSA-1 Strong Arm
	Accessory
Grille:	Polyester Powder Coated, 16GA
	Galvanized Steel, with Rotatable Logo
Dim (H x W x D):	610mm x 442mm x 329mm
	(24.00" x 17.42" x 12.97")
Net Weight:	25.1 kg (55.3 lbs)
Shipping Weight:	28.2 kg (62.1 lbs)

1Half Space measurement.