Electro-Voice RE410 technical specifications KeyFeatures, GeneralDescription, ApplicationNotes

RE410

Handheld Condenser

Microphone

KeyFeatures:

•Versatile Condenser Microphone, Ideal for Both Vocals and Instruments

•Cardioid Polar Pattern with Excellent Feedback Rejection and Acoustic Isolation

•Multistage Pop Filter Eliminates Breath Pop Noises

•MemraflexTM Hardened Grille Screen

•Warm-GripTMHandle for More Comfortable Feel

GeneralDescription:

The Electro-Voice® RE410 is a professional quality hand- held condenser microphone that was designed specifically for vocalists, yet has the versatility, smooth response, and dynamic range to make it outstanding for virtually any application. The RE410 is the ideal vocal microphone for anyone that appreciates the crisp high end and warm proximity effect that can only come from a top performing condenser microphone. The response of the RE410 is tailored to provide just a slight amount of “air” in the 5 to 10kHz area, enhancing the sound without adding stridency. The RE410 features a cardioid polar pattern that provides great rear rejection and a smooth off-axis response that’s perfect for performers who tend to “wander” around the mic.

ApplicationNotes:

The low frequency response of the RE410 microphone varies with the distance from the sound source. Known as “proximity effect,” maximum bass response is produced in “close-up” use with the microphone 1/4 inch from the sound source. Normal bass response is experienced with working distances greater than 24 inches. Working close to the microphone will produce a more robust sound. Close up positioning of the microphone will also reduce the potential for feedback from the sound reinforcement system. When close-talked, the bass-boost provides an increase in overall microphone output level. The mixer gain may be proportionately reduced, resulting in a reduction of the system’s sensitivity to feedback caused by sound entering the microphone from the loudspeakers.

Technical Specifications:

Generation Element: Self-Biased condenser

Frequency Response: 50 Hz to 20,000 Hz (see chart)

Polar Pattern: Cardioid (see chart)

Sensitivity, Open Circuit 4.0mV/Pascal

Voltage, 1 kHz:

Clipping Level (1% THD): >140 dB SPL

Self Noise: 26 dB SPL “A” weighted (0 dB=20 micropascals)

Dynamic Range: >114 dB

Signal-to-Noise Ratio: 68 dB (@ 94 dB SPL)

Output Impedance, 1 kHz: 250 ohms

Power Requirements: Phantom Supply Requirement: 24 to 48 VDC

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3

Dimensions: Length = 7.15" (182 mm)

Diameter = 2.0" (51 mm)

Shank = 1.0" (25 mm)

Accessories Furnished: Stand Adaptor (Black)

Soft Zippered "Gig" Bag

Net Weight: 9.2 oz. (260 grams)