Electro-Voice RE510 Frequency Response:, Polar Response:, Dimension Drawing:, Low Frequency Selector Switch Location:

Frequency Response:

12000 Portland Avenue South, Burnsville, MN 55337

Phone:952/884-4051, Fax:952/884-0043

Part Number 38110-130 Rev D

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/553-5992 or 402/467-5321

For technical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656

Specifications subject to change without notice.

Polar Response:

Please note that micing techniques are a matter of personal

preference. These are merely guidelines to assist in the placement

of the microphone to gain optimal performance.

Vocals Zero to six inches from the windscreen, and on

axis with the microphone.

Spoken Word Five to ten inches from the windscreen, and on

axis with the microphone.

Dimension Drawing:

1. Always point the microphone at the desired source of sound, and

away from any unwanted sources.

2.The microphone should be located close to the sound source to

minimize interference from other potential sound sources.

3. Use the 3-to-1 rule when using multiple microphones. Place each

microphone three times farther from other microphones as from the

desired sound source.

4. Minimize over-handling of the microphone to reduce unwanted

mechanical noise.

5.Working close to the microphone will increase the bass tone and

also provide increased gain-before-feedback.

Low Frequency Selector SwitchLocation: